My WoodsRunner mystery metal

[stubshaft]

I just recently (like three days ago) bought a Kibler WoodsRunner at an estate sale. For those of you that have built "assembled" one of Jims fantastic kits you know what I mean. Took about 6 hours to get to this point.

This is not my first rodeo as I have previously built one of his Colonials that I bought 6 years ago.

The interesting thing is that I always run a greased patch down the barrel to ensure that it does not rust. I do this in the event I get sidetracked and do not finish the build in a timely manner. However, when I ran the patch down this GM .54 barrel I was rewarded? with a small pile of metal shaving. I pulled out my borescope and found this at the bottom of the barrel.

I used my tow worm and managed to remove all of the shavings, although clearing the vent hole was a little challenging.

I was just wondering where these shaving came from?

 

[2 shots]

likely drilling and tapping the touch hole. update... nope to large missed it the first time.

 

[Beaverman2]

Leftovers from manufacturing, mine had some shavings too, no biggy, clean right up

 

[Phil Coffins]

I found these in mine, surprised yes but they cleaned out OK.
3F60C3BE-302C-431B-9312-88AB1E17EA4D by Oliver Sudden, on Flickr

 

[Bnewberry]

Mine had this too. That’s why you run a patch on a new gun, right?

 

[TerryK]

Found the same in my woodsrunner a couple years ago. As a courtesy I let Kibler know.
No big deal, but surprising as Phil said. Rifle shoots great.

 

[PEARL DRUMS]

I blasted air through my liner hole and got about the same as Mr coffins did. Part of the metal forming game.

 

[Siringo]

I just recently (like three days ago) bought a Kibler WoodsRunner at an estate sale. For those of you that have built "assembled" one of Jims fantastic kits you know what I mean. Took about 6 hours to get to this point.

This is not my first rodeo as I have previously built one of his Colonials that I bought 6 years ago.

The interesting thing is that I always run a greased patch down the barrel to ensure that it does not rust. I do this in the event I get sidetracked and do not finish the build in a timely manner. However, when I ran the patch down this GM .54 barrel I was rewarded? with a small pile of metal shaving. I pulled out my borescope and found this at the bottom of the barrel.

I used my tow worm and managed to remove all of the shavings, although clearing the vent hole was a little challenging.

I was just wondering where these shaving came from?

Mine had this too. It from tapping the hole for the white lightning liner and or breech plug. No worry.