• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Search results

L & R
Shop deals on ebay
the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    Davis Double Set Trigger

    The sear arm is bent downward so I am going to assume that the trigger was not inlet far enough to catch the sear arm.
  2. B

    Davis Double Set Trigger

    Zonie, Thanks for all the help. I will pull the trigger and take a look at it.
  3. B

    Davis Double Set Trigger

    Zonie, The lock will cock just fine. I don't have to set the trigger in order to cock it. Just to fire it.
  4. B

    Davis Double Set Trigger

    I just took the lock off and examined the trigger. When I set the rear trigger and pulled the front trigger, the rear trigger bar jumps up and trips the sear arm on the lock. Also noticed that when this occurred the front trigger bar barely moves and would never make contact with the sear arm.
  5. B

    Davis Double Set Trigger

    Zonie, The front trigger definately has a trigger bar that rises when you squeeze the trigger. What would cause it to engage by setting the rear? One would think that the front would trip the sear also. The sear arm on the lock has a downward bend to it also. Also noticed that if you release the...
  6. B

    Davis Double Set Trigger

    I recently bought a Poor Boy with a Davis Double Set Trigger. Appears to be the Small Double Set Double Knife 0004 model. My question is the rear must be set in order to fire the rifle. If you don't set the rear the front has no contact with the sear at all. Is this normal for this trigger or is...
  7. B

    Shooting Low

    It's a 54 cal Ed Rayl barrel. I started with 80gr 2F and went down to 70gr with the same results. You think I need to go lower on the charge?
  8. B

    Shooting Low

    25 was just a starting point. I will try 50 and see where it is hitting before filing the sight down.
  9. B

    Shooting Low

    I picked up a new Flintlock Saturday and shot it out to 25yds and it is shooting about three inches low at 25yds. The front sight is a blade about .275-.300 high. Question is do I need to file the front down a little to bring the point of aim up a bit? Thanks
  10. B

    Touch Hole

    Have not had a chance to shoot the rifle yet maybe this weekend. To answer an earlier reply it does have a liner it is just filed or milled close to the barrel. If you could see it in person you can see the round outline of a liner. You can kinda see it on the the picture, bottom right corner.
  11. B

    Touch Hole

    Here is a couple more pics of my new rifle.
  12. B

    Touch Hole

    50 cal with a swamped Isaac Haines B weight GM barrel.
  13. B

    Touch Hole

    Just bought this rifle new from Tip Curtis at Dixons on Friday and the touch hole is probably 1/16" in size or less. I am not an expert but do these come small like this so you can drill it to your favorite size, or is this correct. The last one I had was probably 1/8" in size. I can see where...
  14. B

    Brian Turner

    Does anyone know Brian Turner's phone number? the one listed on his site says that it's been disconnected. Thanks
  15. B

    13/16 Getz Barrel

    Does anyone know what lengths the ultralight 13/16 50 cal Getz barrels come in?
  16. B

    Small Siler

    The lock is on an Applachian stock by Cains outdoor's. The stock is a 7/8 channel and set up for a small Siler.
  17. B

    Small Siler

    Thinking about buying a 50cal with a 36" green mtn. barrel and a small Siler lock. Will this have enough spark to fire quickly. The rifle is new and never even been spark tested. If anyone has a small Siler on a 50 cal I would like to hear what you think about it.
  18. B

    Renegade Front Sight

    What is the best way to remove and install a new front sight on a T/C Renegade? Does anyone make a sight tool for an octagon barrel? Thanks.
  19. B

    Renegade

    I got a 50 cal. Renegade and I was wanting to know what is an accurate load for this rifle. It has a 1:48 twist barrel. I have pyrodex RS and 2F Goex ready to go. I will only be shooting round balls currently if you have a favorite and accurate load please share.
  20. B

    Pillow Ticking

    I am wanting to start using pillow ticking and would like to know what width I will need to cut these at. I am shooting a .54 cal
Back
Top