• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Search results

the hawken shop
L & R
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. N

    In the white

    Is it ok to leave the barrel and metal parts in the white?
  2. N

    Ordering powder

    Thank for for your quick response. I finally decided get a flint lock rifle. In case you're wondering, I'm having a rifle made for me. It's a Chamber Little Feller's rifle in .40 cal. I don't the tools or the patience to build one myself.
  3. N

    Ordering powder

    When ordering, the minimum is 5 cans per case. How many of 4f vs 3f cans should I order?
  4. N

    32 cal ramrod

    We're you looking for a bench rod. If so, October country sell 1/4 and 5/6 at 36 inches.
  5. N

    RWS 1075 is too tight

    The reason was After I place them on the cone, it was very difficult to rotate the cylinder and fire them. I had to jam them down carefully. After able to fire all of them, that ended my day at the range. Same day I started a thread asking for help.
  6. N

    RWS 1075 is too tight

    Of the three that I had problem with, 2 fired after a second try. The one that cause a tear did not fire at all.
  7. N

    RWS 1075 is too tight

    The nipples are Treso. They work with rem 11. Ran out, so order RWS 1075. I didn't file down the top, only the "side". It is an Uberti navy london. The tear was not around the edges, it was in the middle of the top of the cap. The tear was triangle shaped, sort of. Location was were the...
  8. N

    RWS 1075 is too tight

    Hello, was at the range shooting my navy revolver. Previous thread was about RWS cap not fitting. So I file down the nipple. 3 of 6 worked with no issue. The problem on one was it didn't fire. When I looked at the cap,3 thing happened. First was a tear on top of the cap, looks like I took a...
  9. N

    RWS 1075 is too tight

    I had asked if there was any specific brand of nipple would fit the 1075, but the answer were to either modify the nipple or buy another brand.
  10. N

    RWS 1075 is too tight

    What I meant to say.
  11. N

    RWS 1075 is too tight

    Ok. Just finish, all appear loose enough to allow to rotate the cylinder. hopefully caps won't start flying when I fire it.
  12. N

    RWS 1075 is too tight

    The reason I ordered the RWS is because I couldn't find any Rem or CCI. I got a thousand, so I got a choice either alter my cones and use the caps or wait for my local gunshop or big box store to get some and let the box sit in the corner. Bummer. :redface:
  13. N

    RWS 1075 is too tight

    Found that 1075 doesn't fit on my Treso nipples from Ampco. It is too tight. I threw my old nipples away, so I'm not able to see if they would had fit. Now I'm stuck, since there is not any other brand available, as far I can see on the 'net. Does any one know of a brand nipple for a Uberti...
  14. N

    Small caliber rifles.

    I got my brass range rod for my .32 cal Pedersoli scout from http://www.octobercountry.com/
  15. N

    brass loading funnel

    I was watching youtube videos and found that some Europeans use a long brass funnel to drop powder into the barrel itself. I can see using a short one to help, but what are benefits of this?
View older results
Back
Top