Search results

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Erwan

    Wads Vs Lube Vs Paper Cartridges

    For pistol? It's as you like/feel, but no difference at the accuracy level... For me, the simplest way is the best: powder, filler (cornmeal), ball, and grease. Concerning the paper cartridges, I use them only with my Sharps .54 cal., the cigarette paper is for cigarettes... If you want to...
  2. Erwan

    Keeping Minie in Barrel

    If in doubt, you can make an impression of your barrel with an oversized bullet, so that, with a micrometer or a good quality analog caliper, you'll know the exact caliber...
  3. Erwan

    Keeping Minie in Barrel

    Your Minié is too small, a Minié must go down the barrel with only his weight, but you must have a bit of friction: grease, air escaping through the barrel rifling when the bullet is dawn over the powder charge, tap lightly with the ram to allow the powder to enter the bullet's skirt, which will...
  4. Erwan

    How old are ya?

    Go to another country, really free, something like the other side of the channel: Macrocescu"ll be glad to welcome you, your wife, and the camping car... Have a nice day. ;) Erwan.
  5. Erwan

    Patch fabric

    You don't need a special mark of patches fabric for that: go to your favorite fabric store with your micrometer and choose the good cotton you need. Generally in the USA, the pillow tissue is the most used...
  6. Erwan

    How old are ya?

    63
  7. Erwan

    How old are ya?

    Hi buddies, I'm nearly 77 years old including 67 shooting, I'm not the oldest, but it begins to do some months and some pounds of powder burned and a small lot of flints ate too.... :D :D
  8. Erwan

    Do You Actually Use Your Expensive Custom Guns or Keep Them as Safe Queens?

    I don't really like using original (ancient) parts. I'm old and clumsy, and accidents happen, so maybe it's a form of respect: I wouldn't want to damage or destroy them...
  9. Erwan

    Coil spring vs leaf spring?

    Yes, you're right, this one is by Leonardo da Vinci for a wheel lock pistol... 👍
  10. Erwan

    Howdy from Wisconsin

    Welcome from Absurdistan.
  11. Erwan

    Hello to all !!!

    Hi and welcome from the wonderful Macronia (also known as Absurdistan)...
  12. Erwan

    Tumbling cast round balls- process and method

    Graphite, what for? The lead is enough auto-lubricant for tumbling, apart from that, don't you use patches?
  13. Erwan

    Paper-Patching, In a Muzzleloader?

    That may be the case, but I'm not sure, that it was mainly a technical system of English. This type of patch or paper wrapping has been used in big games like the long-range Creedmoor games by American, English or French shooters and others. We've also had many military, or civilian weapons...
  14. Erwan

    Stopping power of the 1860 Army

    That's right, I've this small free soft on my computers... Without installation (workin' on Windows only and not Linux): Round Ball Ballistics Calculator for Muzzleloaders
  15. Erwan

    Stopping power of the 1860 Army

    Stopping power of the 1860 Army... In this sense, John Pondoro Taylor's empirical formula has retained all its value... TKOF multiplies bullet mass (measured in grains) by muzzle velocity (measured in feet per second) by bullet diameter (measured in inches) and then divides the product by...
  16. Erwan

    Nitrating paper ..besides hurting stupid takes time!

    I take and use this one... ;)
  17. Erwan

    Tell me of your cleaning rituals

    I'm a straightforward and ordinary guy: - At the range and just after I've finished shooting, I do a little neutralizing cleaning with Young's Parker Hale and water (cutting oil for my lathe is good too ;) ). - When I get home, I put a toothpick in the flash hole, a small quarter barrel-length...
  18. Erwan

    Help, I have an Addiction!

    If the credit card isn't too contorted, it doesn't matter: She may not see anything...... with a bit of luck... :rolleyes:
  19. Erwan

    Ballistol

    I understand: now it's too slippery… :rolleyes:
  20. Erwan

    Ballistol

    Your keyboard is out of order? :oops:
Back
Top