Search results

https://republicammunition.com/pistol-primers-by-brand/cci-pistol-primer/ I order from here all the time

Hornady has been making their own primers for some time now. Around 2014 if I remember right

Lanolin

I have a small lathe I can part it off with. But no way to cut a new dovetail for the front sight. That is the main problem. As I don't work anymore I don't have access to a Bridgeport mill anymore or I would do all of this myself at work. I had a full machine shop connected to out maintenance...

Anyone know where I could send a New Englander barrel to have this done? I would also have to have the under rib shortened and a new dovetail cut for the front site. I have two of these and the one that has the false muzzle does not shoot as well as the older one with a normal muzzle. And that...

Look up Princess Auto. I think that is Canadas version of our HF

Add some tin to the lead. That may increase the diameter a little. Or you can do what is called "beagling" the mold. You take aluminum tape and place it on one half of the mold. You need to cut the tape so it does not intrude into the mold cavities. It will give you whatever thickness of the...

40:1 lead tin is what I am using. Got it from Rotometals.

Tom at accurate molds has a section on the ordering form to input your lead alloy. Plus you can specify the tolerance range for the mold to cast. I usually go for a +- or neutral tolerance. Or you can have it so the mold cast from a 0.001"+ or 0.001-" to the size you want. I like the +- as the...

I am wiping the bore between shots. Fouling has never been an issue.

Conical. Accurate molds is who is going to make the mold. I have a TC 370gr maxi ball and the Lee 250gr and 320gr molds. These shoot ok at best. I don't want a tapered bullet like these are. I feel that is why they don't shoot well at all. I have tried several types of black. Swiss...

My T/C 50 cal has a 0.4995"x0.5095" bore and groove. I want to order a mold from accurate and need to know what size to get the mold made to. Regular cast bullets in centerfire you try for 0.001" over size. But I don't know what the rule is for black powder so I will not have to beat the bullet...

I use a over powder felt wad now. I am out and need to make more. That was the reason behind this post as I like to lube the wads as well.

What is everyone using for lube for these? I need to be able to source locally and available to make lube. So Bear fat is NOT going to work. I have been using TC Bore Butter but it is leaving hard deposits in the barrel and causing hard loading

Eric at HPmolds just modifies them. He does not make any molds.

Wick, I sent you a PM.

If you know the size that you need for your muzzleloader, go here and tell him what you need. Accurate Molds He already has a bunch of muzzle loader molds on file. And each can be made to the exact size of your barrel. These are the only molds I buy for any of my guns anymore. New or...

Anyone on here make them?

Like the title says. Looking to have one made sometime. Just don't know anything about ML's and to have work done. I have been shooting them off and on for 30 years. Would like to have one made for a 32 or 36 cal.

I heated up 4 of them and bent them to hit more square. Never had a problem. Just have to have a torch that will heat it hot enough.