• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

.45 TC Hawken Information

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Colonel_LD

32 Cal
Joined
Nov 2, 2024
Messages
2
Reaction score
1
Location
LEX, KY
I put together a .45 Hawken TC kit back in ‘85 and used it for target shooting and deer hunting. Its a great rifle and well past time, after many years, to get back into the hobby.

I’m looking for information about loads for it such as the chart below and accessibility these days to the pre-lubed Maxi balls I used many years ago.

Thanks a bunch!

Colonel_LD
IMG_3667.jpeg
 

Attachments

  • IMG_3667.jpeg
    IMG_3667.jpeg
    1.4 MB
He is looking for somebody who can publish the page for loads from an old TC manual. The problem is a lot of the online manuals are .50

LD
Yes, I looked up the manual I downloaded and it refers only to the 50. Can't figure why they would have done that.

I think I have my 1974 version of the manual. If I can find it, I'll screenshot the 45 data.
 
I put together a .45 Hawken TC kit back in ‘85 and used it for target shooting and deer hunting. Its a great rifle and well past time, after many years, to get back into the hobby.

I’m looking for information about loads for it such as the chart below and accessibility these days to the pre-lubed Maxi balls I used many years ago.

Thanks a bunch!

Colonel_LDView attachment 360094


Here's what I dug up. NOTE there is different data for Seneca and Cherokee model rifles :

TC LOADING CHART .45 round ball.jpg


TC LOADING CHART .45 CONICALS.jpg

You can find the full generic muzzleloader manual from TC here but you have to subscribe to easily read it TC Manual

LD
 
It's wise to take their accuracy and velocity information with a grain of salt. Accuracy is going to vary a lot from gun to gun and with patching and powder manufacturer. Range time with testing on paper for accuracy results and if it matters, a chronograph for velocities.

I have in the past chronographed a lot of load variables and the results are not generally predicted by any tables from any source.
 
It's wise to take their accuracy and velocity information with a grain of salt. Accuracy is going to vary a lot from gun to gun and with patching and powder manufacturer. Range time with testing on paper for accuracy results and if it matters, a chronograph for velocities.

I have in the past chronographed a lot of load variables and the results are not generally predicted by any tables from any source.
Interesting that from two obviously different printings of the manuals the data stayed the same.
I doubt they ever retested the rifle loads.
They don't list the brand of powder, and this was long before Swiss or Scheutzen
LD
 
Interesting that from two obviously different printings of the manuals the data stayed the same.
I doubt they ever retested the rifle loads.
They don't list the brand of powder, and this was long before Swiss or Scheutzen

LD
Yes, and the biggest variable that I found in chronographing loads was powder.

I tested goex, elephant, grafs, swiss, pyrodex and maybe some that I don't recall. I have that data on the desktop. If anyone is interested in seeing it I can dig it out.
 

Latest posts

Back
Top