• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD .54 perc Lyman GPR

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Feb 24, 2019
Messages
1,299
Reaction score
2,224
Location
Central Texas
14F7209C-45AC-414D-AD60-5ACDAEF3F690.jpeg
A87E43E3-EACF-4E13-9DC9-2BFE87A7E5D0.jpeg
EC7248FF-49D7-4FC8-8099-1D781A4FB025.jpeg
EA1D502F-14CF-461E-9909-6469CD25F0C5.jpeg
A824EC39-0E63-4BCC-959A-2300169F2439.jpeg
06049D1C-371A-42DA-B9E3-B8AA11BCED97.jpeg
B0EFAC52-2CB8-4610-AA36-6150215EAA07.jpeg
5974C01B-B8DE-429A-9514-7F146F96B818.jpeg
E7639323-2370-4899-8A42-A8EF1FD50841.jpeg
57946A8E-D912-497E-A36F-63ECACB8FB97.jpeg

I have finally made the move to a few hand made rifles, so my old friend needs to move on to a new home.

Rifle is in outstanding condition with a great piece of wood. I bought this rifle new so long ago I don’t remember when it was. Date code is BD. Bore is excellent. Overall finish I would rate at 90%.

Ramrod is original to the rifle.

The only two mods I have done are to replace the adjustable rear sight with a fixed traditional sight (a .535 ball over 85 grains of Goex 3F hits dead on at 75 yards) and I had the crown recessed to ease loading. See pics.

$550 shipped to its new home. You won’t find one as pretty as this now.
 
Rifle still has its original oil finish. I just wiped it down with some Brakefree to make the grain pop for the pictures. So it won’t be glossy all the time.

I keep the exterior metal on my guns wiped down with Brakefree from time to time to keep them free of rust.

Was looking at new GPRs this week and you won’t see new wood anything like this one.
 
I will look for the rear sight. Honestly don’t know where it would be it’s been so long. The rifle is in Texas.

Packed in a box and shipped USPS (have done a couple recently) will be about $30.
 
A young lad in college bought a GPR kit several years back and I put it together for him. I was extremely impressed with how it turned out. We shot the rifle and was planing on working up a load it liked.I had a Ithaca Hawkin that was an excellent shooter so I started with the load it liked.His gun liked it as well as it shot just as good as my rifle. The only fault I found with the GPR was the snell looked like someone cut the side off.Whoever purchases your rifle is going to get a good shooter if the barrel is the same as my friends.
 
Status
Not open for further replies.
Back
Top