hocuspocus
32 Cal.
- Joined
- Jan 13, 2005
- Messages
- 47
- Reaction score
- 0
I read through some posts and noticed that problems similar to mine were fixed using the methods I used. That is to say that when it had bubbles inside I cranked the heat on everything and went to a dipper, but now heres the deal. It just moved those bubbles from inside up to the ogive in the form of something that looks like a small butt crack. On some its hardly noticeable. Some its sunk a 32 of an inch and 3/16" long..Any thoughts? Really cleaned and grooved vent lines, didnt help. It seems to be that I can get to hot believe it or not. Cause if I'm to cold I get the bubbles inside. As I keep heating things those go away. A few minies later and the side butt cracks start