A plea for help finding...

[apachesx2]

If you cleaning it well after every event and protecting it I don't see why the threads would corrode... I could see external chokes looking terrible on a Damascus barrel and would agree... Just because they say Briley does not mean you have good tastes... I have a complete set of Briley choke and mostly use internal chokes and only use external chokes for special situations like long range duck hunting when function out weights taste...

 

[JCB]

I sent you a pm where you can find one. I did a google search and it took me to one of the gun auction sights where there is one up for bid right now. It has the removable chokes like you want.

 

[FishDFly]

"I don't know if I'd put choke tubes on a ML shotgun because I'd worry the choke threads would get fouled up and rusted to the barrels. I would think you'd need a lot more attention to the muzzles."

I have a T/C New Englander and a Pedersoli 10 gauge, both with screw in chokes.

I clean both with water and soap after shooting.

After cleaning the barrels, I remove the tubes, clean the tubes with a tooth brush and clean the threads in the barrel with a tooth brush and wipe the threads with a soft rag.

I coat the tube with RIG and the threads in the barrel get a coat of RIG, screw in the tube and the barrel gets a coat of 3 in 1.

Never had a problem with rust.

Never had a problem with loading either with choke tubes.

 

[azmntman]

I had the pedersoli 10GA and same report on cleaning. Not a big deal. As for choke tubes I do recall it was pretty tight with the full choke but I got em loaded.

 

[FishDFly]

Did you find a shotgun and if so where?