• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Antler Ideas

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tryinhard

40 Cal.
Joined
Jul 18, 2007
Messages
285
Reaction score
8
Hey guys,

I'm out of ideas for my antler. Just got done with a 30 gr. powder measure. Got all kinds of buttons and knife handles. Yall got any ideas?

Thanks,
TH
 
The tips of antlers can be made into a necklace that looks like claws or fangs.

You can also inlay crushed turquoise in antler burrs to make a great pendant too.

If you have a flintlock, you can use a hollowed out antler for a pan charger.

Good Luck !
 
My vent pick is a wire attached to a piece of antler tine, and I like it.

An inkpen made from an antler would be interesting. Some ladies might like earrings made from the very tip of the tines. A big straight piece of antler could contain a small flashlight.
 
I've used antler for small file handles,and handle for home-made tool to cut grooves in leather when making knife sheaths.
 
I've made bottles out of a 3" - 5" long beam section, hollowing out from the smaller, then making the dead end from a piece of Walnut (whatever), and a stopper from another/smaller tip - or a brass horn filling fitting.

DSCN0255.JPG


(I found/bought the antique drinking horn)

.
 
Back
Top