I had trouble with their English style lock and after using it for a couple years sent it back. Turns out there was a change in the frizzen spring. The upper arm with the roller was made slightly longer. They replaced it no charge and it works 100% now.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Bouncing and buzzing frizzen.
- Thread starter Kansas Kid
- Start date
Help Support Muzzleloading Forum:
- Joined
- Dec 13, 2004
- Messages
- 108
- Reaction score
- 205
Surely this problem, like most others, is fixable. Don't give up; you will eventually figure out a workable solution.
You might also contact Brad Emig at Cabin Creek Muzzleloading in Hallam, PA: 717-757-5841; www.cabincreek.net. He is well known for fixing flintlock issues.
You might also contact Brad Emig at Cabin Creek Muzzleloading in Hallam, PA: 717-757-5841; www.cabincreek.net. He is well known for fixing flintlock issues.
Took most all the buzz out by heating and bending the tail of the frizzen stop and for good measure at the moment put a small piece of heat shrink tube over the stop to act as a buffer.
Now to go shoot it to see if there’s any difference at all. Don’t really expect much but it’s worth a try.
Now to go shoot it to see if there’s any difference at all. Don’t really expect much but it’s worth a try.
Similar threads
