Can anyone identify CVA model and what these are on the stock

[JJCASTINGS]

I tried searching but I do not know what they are called. I recently acquired this 50 cal CVA. It is not marked with a model number. It looks like one of what appears to be brass round head nails :hmm: was lost and the original owner substituted an upholstery tack on both sides of the stock. Unlike the rest, they have an embossed pattern that does not show in the picture. All the rest are smooth. See pics. I am wondering where to order the proper item, or suggestions on making them. In addition can anyone identify what model this is? Only has the CVA 50 caliber black powder made in Spain on the Brown barrel. After market adjustable sight was installed too. Barrel measures 32 and 15/16 inches. The hammer does not always engage to full cock, seems to have something sticking. If I remove the 2 large screws on the opposite side of the stock, will this remove the assembly so I can clean and lube it? Thanks in advance for all the help.

 

[russecv58]

it looks to me like you have a bunch of upholstery tacks. brass tacks were big with the native americans for decorating their rifles. as for the model it looks like a mountian rifle to me. yes the removing two screws will allow you to take the lock off. :thumbsup:

 

[cynthialee]

looks like a CVA Hawken

the tacs were not on it when it left the factory

 

[cynthialee]

that lock will come right out by removing the screws. Bet if you clean it up, lube it and tighten it up on the insides a touch it will work better.

 

[BFJ]

What you have there is CVA Mountian Rifle. I have owned and shot one since 1976. Mine is also tacked. Bring the hammer back to half cock and then remove the two lock bolts. Carefully work the lock out. The tacks can be bought from Track of the Wolf, maybe some lock parts if needed. If the odd tack bothers you take one off the bottom and replace it with odd one. Some of these rifles were made with USA barrels such as mine. Your sights may have been replaced for most I have seen had a blade front and Rocky Mountain type rear. It looks in great shape, if the bore is good you may have a shooter here. Patched round balls is the way to go. Good luck.

 

[JJCASTINGS]

WOW GUYS, while I was searching another tropic, you all solved my problem. I have one of the small bore light that drop down the barrel. It is nice and clean, no pits etc.

Glad to know about TOTW. I was looking at their site getting an order together for other things.

I was just wondering if the large tack, one was original or not.

Thanks on the tip that it is the Mountain Rifle. I was guessing that just on the barrel length compared to a Hawken. I read someplace that this would place the gun in the late 60's. And that maybe only about 500 or so were made. Err or in the GB auction title. No one else bid on it and no reserve. Snagged it for $145. $24 actual shipping cost.

 

[Hawgeye]

It looks to be a newer 2nd issue mountain rifle. The lock bolt escutcheons on the early models (1970's) were inletted flush, they had US made barrels and the factory fitted patch box had four screws. Some rifles had very nice maple stocks. Mine is a 1976 kit gun with a douglas barrel. It shoots as straight as anything I have in the safe. The rear sight on this one is a later model. The tacks are decorative add-ons. This one has nice wood. Most were pretty good shooters. Just read your latest post. $145 is a steal. Several sold on GB for over $300 this fall.:thumbsup:

 

[cynthialee]

I stand corected.

 

I would venture the original owner did all the tacks.
I'm not sure but i don't think CVA did it at the factory. Leastwise I never saw one.
Check with upholstery shops, they may have a selection of smooth ones. Maybe try this online site: http://www.beaconfabric.com/vindex.html?cat148.htm

As to the lock and trigger.
The trigger set screw for the set trigger, may be currently too tight or was for to long in the past and either wore off the tip or the screw or the sear.
First try backing the screw out and then try it.
If not then you will need to pull the lock and the trigger and see where the malfunction is.
The screw for the set trigger is normally located between the two triggers. But I don't see it in your picture. You might have a the newer design.
Hope this helps you.

 

[Claude Mathis]

Crazy Crow has both high and low dome tacks.

Search "tacks" when you get there: http://www.crazycrow.com

 

[George T.]

It looks like you got a great deal! It looks in great shape to me. Geo. T.

 

[JJCASTINGS]

I pulled the lock before seeing your post. It did have dirt and grit. But then the lock would not set at full cock. Pulled the trigger guard to adjust the screws. There was one for each trigger.
Rear screw was out to far. Adjusted to where it sets full cock and has the least resistance to set the front trigger, but still allow sure engagement to full cock. The set the front trigger to my liking too.

Thanks for the tips. I am going to do this to all my dual trigger guns.

 

[JJCASTINGS]

Saved the link to CrazyCrow. They have so much stuff I may have to create a Persona.

 

[JJCASTINGS]

Sure does now. Real smooth release to set, then easy pressure to fire.

 

[JJCASTINGS]

I knew when the auction title was messed up, that few had seen it. That No Reserve was great. Started at and sold for $145.

 

[S.Kenton]

I like the wood! Also that rifle is BEGGING for a buckhorn rear sight! I had a CVA mountain rifle in a 45 cal. it was a GREAT shooter!

 

[Ron_T.]

I had a similar problem with my older CVA Hawken Gamster-Hunter's (28-inch barrel, 1:48 twist) hammer. Once I remove the lock, I saw how dirty it was and thoroughly cleaned and lubed the lock assembly prior to re-installing it.

It worked perfectly after being cleaned and lubed.

It appears you got a "bargain"... good on you!!! :thumbsup:

Enjoy your new (old) rifle... and make GOOD smoke! :hatsoff:


Strength & Honor...

Ron T.

 

[RedFeather]

Judging by the two screw patch box, that is the model with the spanish barrel. It originally had a conventional rear sight. Owner probably replaced. Ditto did the tacks to personalize it. Looks good. I would have fun with it. Original rear sights come up in ebay from time to time. You may like a period replacement better.