Nice little .32 Colt pistol, and you will have not problem touching off the trigger 225.00 shipped
Last edited:
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
SOLD Colt .32 Pocket Pistol
- Thread starter Mulebrain
- Start date
Help Support Muzzleloading Forum:
- Status
Did this particular model come with a triggerguard?
I am not sure or the guard has been cut off
Look at the photo looking directly down on the trigger. Some pretty deep file marks are evident. I’d be willing to bet that a previous owner ‘modded” this revolver.
- Joined
- Feb 22, 2022
- Messages
- 558
- Reaction score
- 760
I'll go $150, shipped. I'm not trying to insult you, but it's going to cost $50+ for a trigger guard, plus fixing any other wrongs done to it. If nobody else wants it, you can pm me.
220.00 shipped!
210.00 shipped
Worth that in parts
Worth that in parts
I believe that is a Euroarms. They sold out to Pedersoli in 2011. All the parts and tooling. Pedersoli in turn sold all the parts to different dealers around the world. ASM, ASP, EIE, EIG and maybe even Uberti parts might fit. I had an EIG and the Uberti grips and trigger guard interchanged as did the cylinders. The only problem I had was fitting the barrel to the frame. The studs didn’t line up. I had an ASM brass, Uberti steel and the EIG brass. I was trying to make one steel frame out of the three to no avail. Got rid of all of em.
EIG and EIE were importers of different manufacturers. Unless they are stamped by a certain manufacturer, they are hard to find out who made them. Sometimes they did have the overlapping PR on them. Which I believe is Riva Esterina.
EIG and EIE were importers of different manufacturers. Unless they are stamped by a certain manufacturer, they are hard to find out who made them. Sometimes they did have the overlapping PR on them. Which I believe is Riva Esterina.
Last edited:
Bruce Vanderhoofbprvan
32 Cal
Does the trigger fold untill cocked , like some old pocket pistols without a trigger guard ?
I not , probably modified.
Buzz
It does not do that
205.00 shipped
- Joined
- Jan 26, 2019
- Messages
- 478
- Reaction score
- 369
Pm sent
- Joined
- Jan 26, 2019
- Messages
- 478
- Reaction score
- 369
I didn’t notice you dropped the price to $205 shipped. I will take it.
- Status
Similar threads
