• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD Colt .32 Pocket Pistol

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Jun 6, 2005
Messages
7,263
Reaction score
10,825
Location
Summerville, SC
Nice little .32 Colt pistol, and you will have not problem touching off the trigger 225.00 shipped

IMG_4457.JPG
IMG_4458.JPG
IMG_4459.JPG
IMG_4460.JPG
IMG_4462.JPG
IMG_4463.JPG
 
Last edited:
I'll go $150, shipped. I'm not trying to insult you, but it's going to cost $50+ for a trigger guard, plus fixing any other wrongs done to it. If nobody else wants it, you can pm me.
 
I believe that is a Euroarms. They sold out to Pedersoli in 2011. All the parts and tooling. Pedersoli in turn sold all the parts to different dealers around the world. ASM, ASP, EIE, EIG and maybe even Uberti parts might fit. I had an EIG and the Uberti grips and trigger guard interchanged as did the cylinders. The only problem I had was fitting the barrel to the frame. The studs didn’t line up. I had an ASM brass, Uberti steel and the EIG brass. I was trying to make one steel frame out of the three to no avail. Got rid of all of em.
EIG and EIE were importers of different manufacturers. Unless they are stamped by a certain manufacturer, they are hard to find out who made them. Sometimes they did have the overlapping PR on them. Which I believe is Riva Esterina.
 
Last edited:
Status
Not open for further replies.

Latest posts

Back
Top