Considering trying some 3F in my .54 GPR, anyone out there ever do so?

[ETipp]

Just wondering if anyone out there has ever used 3f BP out of a .54 with RB. Years ago I had an old Renegade .54 that shot RB and I'm thinking I used 3F but I am not sure about it. I know there are listings for such. And yes, I know 2F is recommended but there are listings for 3F.

If you have used 3F (especially in a GPR) please post up your results, accuracy, load, etc.

 

[pacanis]

3F is the powder I use for my .54 Sharps 1859 in a paper cartridge.
I can't recall if I tried 2F first...

 

[Rifleman1776]

Just about everyone not living inside of Red China has used it in most calibers. And successfully.

 

[Des52]

My .54 Renagade groups open up about an inch with 3F. My fast twist CVAs love 3F, they are 1:38.

 

[waksupi]

I use 3FFF in everything from .32 to .62. No ill effects after at least ten cases of powder over the years.

 

[akroguy]

3F in everything except artillery.

Unless someone wants to give me some artillery so I can try it.

 

[springfield art]

Just wondering if anyone out there has ever used 3f BP out of a .54 with RB. Years ago I had an old Renegade .54 that shot RB and I'm thinking I used 3F but I am not sure about it. I know there are listings for such. And yes, I know 2F is recommended but there are listings for 3F.

If you have used 3F (especially in a GPR) please post up your results, accuracy, load, etc.

Should not be a problem at all. Just test shooting results before hunting! I bet you get a ton of advice on this question as there seem to be lots of experienced GPR shooters here.

 

[deerstalkert]

lyman GPR. Flintlock .54 65g fffg. 50 yards. .014 bear grease lubed .535 ball. off the bench

View attachment 237230

 

[springfield art]

Yikes! Most excellent!

 

[Semisane]

From the bench.

 

[RMH]

Lyman Percussion GPR with patched RB over 90 gr. of Goex 3f was my go to hunting load with that rifle for many years.

 

[azmntman]

I use it in most. Just trying new powders. FYI 1F in a .58 Cabelas Hawking tightened up my groups substaintly over 2f or 3f. Also raised POA about 6 inches at 65 yds. Got a 3 shot 3/4" group though.

 

[BS2366]

What are the pro's and con's of 2f and or 3f? Are both fairly equal in 45 and 50 caliber rifles?

 

[appalichian hunter]

Everything I shoot is charged with 3 f

 

[ETipp]

From the bench.
View attachment 237242

Very nice. I need to get back out soon and do more experimenting with mine. Mine was scattering them all over the paper at 50 yards with 80, 85 and 90 grains of 2F and .530 RB. However, I found the rear buckhorn sight was loose and no doubt moving about at its own will. I hope I didn't make a mistake of buying two boxes of .530 RB instead of .535 RB.

 

[appalichian hunter]

.530 ball, 15 thousand patch, 80gr. 3-F Homemade lube- bees wax Crisco olive oil Deer death in my mountain rifle. Most of my deer are killed at 50 yards or under the furthest one was 90 paces I have a pretty long stride so figured right around 100 yards.

 

[pacanis]

I had a loose sight on one of my guns and found it would move when I settled the powder. I shimmed it, but no longer hit the side to settle the powder.

I just checked and saw where my 20ga smoothie preferred 3F, too.

 

[bronko220002]

Just like the NIke slogan: Just Do It.

 

[TDM]

If I could only have and use one powder it would be 3F.

 

[Bobby MacAlphin]

Just wondering if anyone out there has ever used 3f BP out of a .54 with RB. Years ago I had an old Renegade .54 that shot RB and I'm thinking I used 3F but I am not sure about it. I know there are listings for such. And yes, I know 2F is recommended but there are listings for 3F.

If you have used 3F (especially in a GPR) please post up your results, accuracy, load, etc.