Copy of an original blunderbuss

[davec2]

Ran the proof test today. First proof was 473 grains of 1F powder, 315 grains for the second test. Both pushed 2,100 grains (~5 oz) of lead shot. I set it off electrically each time. Just to give you a feel for how large the charge and shot column were, on the first test they took up 7 inches of a 12 inch barrel. The second proof charge took up 6 inches. Here is the set up and the video of the test......This is the same video just cropped so you can see it better. And then a picture of the post test inspection. All the original barrel diameters were the same both before and after the test.

 

[Brokennock]

Ran the proof test today. First proof was 473 grains of 1F powder, 315 grains for the second test. Both pushed 2,100 grains (~5 oz) of lead shot. I set it off electrically each time. Just to give you a feel for how large the charge and shot column were, on the first test they took up 7 inches of a 12 inch barrel. The second proof charge took up 6 inches. Here is the set up and the video of the test......This is the same video just cropped so you can see it better. And then a picture of the post test inspection. All the original barrel diameters were the same both before and after the test.

Thank you, thank you.
Great stuff.

Given your field and location, why didn't you test fire with just wadding,,,, but put it muzzle down and see how high you could male it go?


Just kidding.
Great work sir.

 

[davec2]

Thank you, thank you.
Great stuff.

Given your field and location, why didn't you test fire with just wadding,,,, but put it muzzle down and see how high you could male it go?


Just kidding.
Great work sir.

Brokennock,

Don't think I didn't think about launching it....finding it might have been the problem...

 

[PathfinderNC]

That’s got quite the kick
Congratulations on a very successful launch!

 

[jstroke]

Wow, that’s impressive! How does the remote ignition system work?

 

[Tejano Libre]

Tejano.......sorry I missed seeing your question. Can you send me any kind of a picture of the part you are missing ?

Howdy Super Dave!
I located the "Conch Shaped" Hinged Brass Patch Box Cover on a Dealer's website and it's identical! It also happens to be on a Belgian Percussion Blunderbuss so I'm extremely optimistic! The Following Link will hopefully take you directly to the "Object" of my Lust! www.collectorsarmoryca.com
"Unusual Belgian Percussion Blunderbuss With Duck's Billed Muzzle."
Thank You Kindly! I sincerely appreciate Your Time, Trouble and Patience Amigo! I am not in a Rush so Please take a look at your earliest convenience!
Be Well,
Tejano Libre

 

[sussexmuzllodr]

Awesome stuff!

 

[davec2]

Wow, that’s impressive! How does the remote ignition system work?

Jstroke,

I just use an electric match (which I use in rocket propulsion testing and they are used by the thousands in the fireworks / pyrotechnics industries) to set off powder at the touch hole on the barrel. Here is a picture of the electric match before I secure it with tape.....The match is fired with a battery powered firing box and through the long firing cable you can see in the foreground...

 

[springfield art]

Here are a few more photos......

Wow!

 

[jstroke]

Jstroke,

I just use an electric match (which I use in rocket propulsion testing and they are used by the thousands in the fireworks / pyrotechnics industries) to set off powder at the touch hole on the barrel. Here is a picture of the electric match before I secure it with tape.....The match is fired with a battery powered firing box and through the long firing cable you can see in the foreground...

Thanks David. I’ve always wondered what the safest way was to test a barrel.

 

[davec2]

The fellow that commissioned this duplication of a blunderbuss asked if I could mimic the original proof marks and I said I would give it a shot. Now that the barrel has been proof fired, I spent some time trying to duplicate the original proof mark tools. I have a set I purchased from Track of the Wolf some time ago but they are 1) really too large and 2) they are made in reverse....they stamp the design into the metal rather than "coining" the design so that it is raised above the back surface in a small cartouche. So I dressed down a couple of pieces of W-1 drill rod and started in with a graver. These oval tools are not much bigger than a quarter inch in the long axis so it's tiny work but I think they came out OK. I changed the design enough so that, in the future, no one knowledgable would mistake the marks for originals from the 18th century. I may need to do some additional refining but so far so good.....

Tools.......



Struck in lead.......



Lead compared to original barrel marks.....