Cracked Stock Repair

[Eric Krewson]

I really messed up a nose cap inlet one time, I bought a cast nose cap, hated it and changed to thin formed one but needed to replace all of the wood I had removed for the cast cap inlet. The cast nose cap is shown in the picture.

Superglue and sawdust to the rescue, this combo is as hard as a rock.

 

[FlinterNick]

Glue it , epoxy, bed the channel. Blend it in .

Rubberized glues and gap fillers like starbond work great

 

[senseisugarbear]

I've repaired all manner of things that go BOOM. Spread crack, 2 part epoxy mixed with fine saw dust to match.Epoxy must penetrate to inside.Remove spacers squeeze and wipe excess from rod channel....NOW we diverge, cut tin foil to fit barrel channel to fit full lenght plus 1/2" past front, put in barrel and tightly taping the hell out of it , by turning electrical tape,, sticky side up you'll aviod adhesive on your parts, stretch tape when making a couple points on the repair,let sit over night. trim overage on tin foil front. You may have clean epoxy from pin holes,then gently install rounded pins. Sounds harder than it is ,,,But your Great Grandkids will be shooting that rifle LONG after You're gone...Be Safe>>>>Wally

 

[wiscoaster]

.... by turning electrical tape,, sticky side up you'll aviod adhesive on your parts,....

Thanks!! Great idea. I would have used masking tape, which doesn't stretch. Your method is MUCH better.

 

[The Crisco Kid]

This is where some rubber surgical tubing works great. It's fast to apply holds things tight. As Eric mentioned Super Glue is great for this sort of thing but so is Titebond.
I thought I'd better add this to keep things going. Only 5 pages on fixing a simple crack just isn't enough!

 

[wiscoaster]

...Only 5 pages on fixing a simple crack just isn't enough!

ps - thanks for the surgical tubing idea.

 

[45man]

A slow cure epoxy, I like Accra Glass best and it comes with dyes. A good heavy coat of wax also is a good release agent. Wrap tight with inner tube bands or surgical tubing after putting the barrel back in.

 

[Shiloh]

You break your gun.

You ask for help.

People who know what the hell they're talking about offer advice to help you.

You reject the advice and help while not saying THANK YOU for the advice and help.

Then you say those of us that offered advice and help have fragile egos.

Just doesn't add up.

I believe he did thank those that actually helped but there were more posts that were critical than helpful.

 

[wiscoaster]

I'm going with the clear Starbond. It's almost invisible against oiled walnut:

The repair will be posted as a build log entry. My thanks to all that made useful and informative suggestions both about product, process and technique.

 

[Tn poor boy]

Recommendations needed please on best way to go about repairing a crack at the muzzle end:

View attachment 240642
View attachment 240643

First Stan it then use thin glue **** it with tape. Next day remove tape sand lightly. And move on

 

[wiscoaster]

The crack has been repaired. Build log entry here:
https://www.muzzleloadingforum.com/threads/my-kibler-smr-build-log.166072/page-23#post-2398311

 

[oldwood]

Only thing about super glue , once it's on the surface of light colored wood , it won't take alcohol base stain. Has to be sanded off the surface for stain to work.

 

[wiscoaster]

Only thing about super glue , once it's on the surface of light colored wood , it won't take alcohol base stain. Has to be sanded off the surface for stain to work.

Thanks. I don't think it will be a concern due to where it's located. Good caveat to know, though, for future reference.

 

[SDSmlf]

Only thing about super glue , once it's on the surface of light colored wood , it won't take alcohol base stain. Has to be sanded off the surface for stain to work.

One of the advantages of using dye with a product like Acraglas. Plus if the joint fails, Acraglas and similar will adhere to itself, while other types of adhesives will not.

 

[Comfortably_Numb]

Only thing about super glue , once it's on the surface of light colored wood , it won't take alcohol base stain. Has to be sanded off the surface for stain to work.

That's why you stain the area befor you glue.

 

[S.Kenton]

That's why you stain the area befor you glue.

And after you do so the repair is nearly invisible. Stain then glue.

 

[Comfortably_Numb]

And after you do so the repair is nearly invisible. Stain then glue.

Been doing this for decades. Nobody listens. People are still mixing glue and saw dust.

 

[Snydly]

Been doing this for decades. Nobody listens. People are still mixing glue and saw dust.

If it works for them,, and they are happy. that is the bottom line for all of us. Does it work and am I happy with it.

 

[Snydly]

 

[Snydly]

View attachment 241763

"We use titebond or Stickfast CA glue". This is a direct quote from Jim Kibler in a reply to me on the best glue for the job