I am currently cutting custom barrel channels and ramrod holes. I can use your wood or I have a great selection. I can cut any profile and have a very quick turn around time. Usually in a week. Please PM me or email at [email protected]
Custom cut barrel channels and stock blanks
- Thread starter Trapper Bill
- Start date
Help Support Muzzleloading Forum:
Location?
Southern Indiana. You can ship it to me. The USPS is very reliable and fairly priced.
Any photographs and/or where can we see and hear about your work? No disrespect, you are just kind of new here.
I have been a builder for 35 years. I just got tired of high stock prices and long waits so I built a fixture for inletting barrels. Never was a big social media guy but figured this is probably the best way to get the word out. I do custom set up and can give you exactly what you want and it will be square on all four sides
Attachments
Do you cut round channels ?
Yes sir
I have had a barrel inlet recently by Trapper Bill and his work is very good. I met and talked with him a couple times. He showed me his process and the work was turned around quickly. Very friendly and offered any additional help I needed building the rifle.
He and his family has been involved with shooting at Friendship and local matches for a long time.
Turns out we have a couple friends in common.
I would recommend him without any reservations.
Don
He and his family has been involved with shooting at Friendship and local matches for a long time.
Turns out we have a couple friends in common.
I would recommend him without any reservations.
Don
How about pricing?
Barrel channels
Half stock straight. 75
Full stock straight 100
Swamped 125
Oct to round 140
All prices include ramrod groove and drill 5/16, 3/8, or 7/16
Shipping is extra.
Wood prices
Full stocks up to 48”barrel. #1full curl 250-300
#2 75-90% 200
#3 50-75 % 150
#4 plain to 59% 100
Half stocks range from 75 to 150
I have around 80 to100 stocks to choose from
- Joined
- Jan 21, 2021
- Messages
- 378
- Reaction score
- 979
Ramrod channel and drilled included ? Ooop's never mind..., you already answered that. 
Yes sir. 5/16, 3/8, and 7/16Ramrod channel and drilled included ? Ooop's never mind..., you already answered that.
- Joined
- Mar 13, 2020
- Messages
- 7,495
- Reaction score
- 21,016
- Location
- On the Border in Idaho looking at BC
tag for future!
- Joined
- Jan 21, 2021
- Messages
- 378
- Reaction score
- 979
'Got it! All i needed to do was re-read Bill's post before posting. Sheeesh...! 'Like I always say "'No sense being an idiot If you can't show it now and then".
ILoveMuzzleloading
40 Cal
- Joined
- Aug 27, 2021
- Messages
- 174
- Reaction score
- 430
I can vouch for Bill. Good dude and good work.
- Joined
- Jan 21, 2021
- Messages
- 378
- Reaction score
- 979
I'm in the process of selecting a blank with him right now as a matter of fact !
He's going out of his way to help me pick one out.
- Joined
- May 6, 2013
- Messages
- 4,286
- Reaction score
- 9,867
Thats great !! Best of luck to ya bud ! You do a great service for folks . Brain dead me has to try and remember to write down your info and tack it on the wall of my shop . You can help SO many folks get a start on their builds ... Really cool what you do Bill !! I'll try and send folks your way ...
Last edited:
Ive been averaging less than a week turn around on inpetting. Here is some of my work. I also came into more stock blanks giving more variety. I have well over 150 stock blanks to choose from.
Attachments
Is that the Hoyt barrel? Looks like a big hole.
