I’m not a cva guy but I picked up a complete Cva hawken stock with lock that needs barreled. It needs to be a 15/16 barrel with a button breech. My main question, is there any other barrel options that will work besides the cva? I found new in the white barrel on eBay for what I consider reasonable but it’s bare without sights and other needed parts. I appreciate any opinions on what I can do and where I can find it.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Cva Hawken guys! Need advice
- Thread starter Fastleo
- Start date
Help Support Muzzleloading Forum:
No info on it
You should have no problem getting a barrel, but it depends on his asking price for the CVA Hawken.
Besides the missing barrel, does it have the rest of the hardware??
It’s a complete stock and lock, just needs a complete barrel.
If the price is right, go for it.
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,348
With enough time, effort and money about anything can be made to 'work'. To be a 'drop-in' there's about a half-dozen CVA barrels that'd fit. And if you find a CVA barrel with the hooked breechplug remove one screw & replace the button tang with a hook tang.
That’s actually something I was thinking about, so if I get a hook breech tang i can use a hook breech barrel with no other fit issues? I’d like to know what the half dozen other models are so I can expand my eBay searches. That’s where I generally find parts.
I have a little experience with these CVA rifles...
If your stock is a single key half stock then the Mountain Stalker, Bobcat, and the Pioneer rifle will all drop right into that stock. And I suspect any of their 15/16" half stock single key rifles will work also. Ardesa made them and they didn't really depart far from the basics for any of their stuff.
If your stock is a single key half stock then the Mountain Stalker, Bobcat, and the Pioneer rifle will all drop right into that stock. And I suspect any of their 15/16" half stock single key rifles will work also. Ardesa made them and they didn't really depart far from the basics for any of their stuff.
Deercreek Products has a lot of old CVA parts. Way better prices than eBay.
As stated, pretty much any CVA Barrel will fit that stock.
Hooked or Button tangs are easy to swap out if needed.
As stated, pretty much any CVA Barrel will fit that stock.
Hooked or Button tangs are easy to swap out if needed.
Thanks for the info, it’s exactly what I’m looking for!
I’ll look them up
They're a good company, I buy alot of parts from them.
Mtman725
The Last Best place, MT
www.deercreekproducts.net I've done real well with CVA parts here.
It will take another 50-60 bucks to complete the barrel with factory parts. You will need the barrel rib, 3 rib screws, 2 thimbles and screws, 2 under lugs and a set of sights.
I saw on eBay they have a 15/16 barrel in 54 cal.It’s a new barrel but it’s bare and in the white. Lots to think about, it’s starting to be a fun project.
There is a 50 cal on gunbroker complete 180.
The CVA barrels are accurate. The 15/16 in 54 is by far my favorite. The hook breech seems to be more user friendly for me.
rafterob
62 Cal.
Deer Creek does not have any barrels left. You might try calling Traditions.
