Double barrel Brown Bess?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JRMan

32 Cal
Joined
Jul 7, 2020
Messages
7
Reaction score
17
Any ideas how this would actually work?

pix199071656.jpg
pix380299692.jpg
pix523124284.jpg
pix436002246.jpg

pix919839224.jpg
 
Last edited:
Send it out to Bobby Hoyt in PA to have the barrel and breech plug integrity checked out. He can then properly line it ... if needed.

I think someone may have intentionally placed that insert in there, perhaps to prevent loading and shooting. FWIW I've seen various muzzleloaders through the years with inches of cast lead at the bottom of the breech, or filled with some epoxy product.
 
Here is the listed description:

Antique British Nepal / East India Pattern Brown Bess Gauge 62 Flintlock Musket.
"TOWER/PROOF" marked locked with a pan that blocks the vent.
The barrel has a thinner tube inside the outer tube. Caliber estimated.
Mechanically works with 1 click but the spring is soft
 
The barrel MAY have a flaw , that’s why the other smaller barrel was stuck in there, to make it shoot. But not with that touch hole…..
 
While its condition is what might be described as ' NRA Disgusting ' it appears to have been used a lot by someone despite its two barrels and hideous treatment .Truth is very often stranger than fiction and the art of the international gun bodger knows no bounds a very evident fact in this case . Rudyards take
 
People will shoot anything to save a buck. My friends dad years ago still fired his very old unmentionable single 12 gauge. It was held together with electrical tape, and the breech was locked shut with a hose clamp somehow. We cut it into 6 pieces and bought him a new one…
 
I can't see how it ever could have been used in that configuration, and I don't think it has anything to do with the actual gun. I expect somebody just jammed a piece of pipe down the barrel long after it's last use.
 
Back
Top