• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD Early Miruko vintage flintlock

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

muskethunter1109

J. McKane
Joined
Apr 11, 2022
Messages
35
Reaction score
28
Location
Scranton, PA
An early Miruko .68 cal flintlock. Front blade sight, Half octagon half round barrel, Steel ramrod, Brass furniture, Plain wooden straight grip stock and forend, Brass patchbox and crescent butt plate, Smooth Bore.
Barrel length, 32.25". SN:3374. Overall length of 50”.
Good bore and strong working action, Bore has some light rust from age, All metal shows finish wear and patina with few light freckles of surface rust, Stock and forend are solid free of cracks and breaks with light dings and handling marks throughout, Good working patchbox and solid butt plate. The ramrod has an interesting feature where it screws into place once fully seated, which is great to never lose it or have it move around while shooting! The inlayed lock and decorative screws definitely add some retro flare to this piece!

Asking $500 shipping included. PayPal, cashier check, or personal check preferred. Thank you!
 

Attachments

  • IMG_7077.jpeg
    IMG_7077.jpeg
    666.9 KB
  • IMG_7078.jpeg
    IMG_7078.jpeg
    2.2 MB
  • IMG_7079.jpeg
    IMG_7079.jpeg
    2.5 MB
  • IMG_7080.jpeg
    IMG_7080.jpeg
    1.5 MB
  • IMG_7081.jpeg
    IMG_7081.jpeg
    2.5 MB
  • IMG_7082.jpeg
    IMG_7082.jpeg
    2.2 MB
  • IMG_7083.jpeg
    IMG_7083.jpeg
    2.6 MB
  • IMG_7084.jpeg
    IMG_7084.jpeg
    1.7 MB
Last edited:
An early Miruko .68 cal flintlock. Front blade sight, Half octagon half round barrel, Steel ramrod, Brass furniture, Plain wooden straight grip stock and forend, Brass patchbox and crescent butt plate, Smooth Bore.
Barrel length, 32.25". SN:3374. Overall length of 50”.
Good bore and strong working action, Bore has some light rust from age, All metal shows finish wear and patina with few light freckles of surface rust, Stock and forend are solid free of cracks and breaks with light dings and handling marks throughout, Good working patchbox and solid butt plate. The ramrod has an interesting feature where it screws into place once fully seated, which is great to never lose it or have it move around while shooting! The inlayed lock and decorative screws definitely add some retro flare to this piece!

Asking $500 shipping included. PayPal, cashier check, or personal check preferred. Thank you!
Bump, still available and still vintage!
 
Status
Not open for further replies.
Back
Top