• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Got my tools, ready to disassemble, any words of warning?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Magnet is your friend, collects all the bits, and helps find the ones that go flying.

Use a socket to remove the cones. Mine were hard as heck to get out with a tool.
A 1/4 drive socket is how they come in and out now.
Good tip JT on using 1/4" drive sockets to remove nipples/cones, they hold up much better than many of the cheap import nipple wrenches. :thumb:
Over the years I've also slotted an assortment of inch & metric sockets with a Dremel tool & files to fit stubborn nipples/cones on my original & repro firearms.
The ratchet model nipple wrench sets by Ted Cash are good quality & will fit most rifle, pistol & revolver applications.
Relic shooter
 
Take lots of pics with your phone as you progress with disassembly and do it on a white sheet on your work bench. Be very careful of "flying" screws.
Bronko your camera tip rates at the top !!
Keep your cell phone handy & take good photos prior to disassembly & through the whole process.
Photos will always remember what you thought you would remember :dunno:
Relic shooter
 
You’re right about loosing dropped parts. I dropped a nose cap almost 2 years ago and still can’t find the darn thing, and that’s not a small part!
once you drop a gun part, it becom4es transdimensional. they end up with the lost socks, to the best of my knowledge.
 
@nine7one

I'm NOT going to read all the replies to your post. So if this has been mentioned then disregard. Go to YouTube and search for Duelist Den. Mike has videos on complete disassembly and reassembly of Colt and Remington cap and ball revolvers. You might have to go back a few years to find them. You can pause and play as you take yours apart and put back together as needed.
 
Back
Top