Help for a rookie flintlocker

[oxfordpa]

Hello everyone.
Just got my first flintlock 50 cal Pedersoli Hawken Hunter and am trying to research amap. Been to the range twice now and am having the hardest time getting the bullet down the barrel. It’s a 1/24 twist rate barrel and muzzle-loader.com tech recommended hornady Great Plains 385g (which I could not even get started) then I got the power belt lead 348g and barely got that down. Was able to shoot two of those, but only after wet/dry patching the barrel til clean. Shooting 70g 2f

I’ve had in lines for years and love the process, but I’m not sure what I’m doing wrong or if there’s a chance my barrel is more narrow than it’s supposed to be.

Any help is greatly appreciated

Thank you from 5C PA

Mike

 

[tdoyka]

i have a CVA Hawken left handed FL and while i can do 2 shots with a ,010" patch with a round ball, i have to clean the barrel when i do the next shot. when i shoot a .005" patch with a RB, it will shoot 12 times. it could go further than 12 shots, but 12 is all i did. i can't get down a .015" patch with the RB.

i have used Lyman and TC FLs with .015" all the way up to .030" patch with a RB. i did maxi balls, but i never could get a group that i was proud of. i never did sabots with a flintlock.

i would say your barrel is tight, mine is too.

 

[atvguns]

Hello everyone.
Just got my first flintlock 50 cal Pedersoli Hawken Hunter and am trying to research amap. Been to the range twice now and am having the hardest time getting the bullet down the barrel. It’s a 1/24 twist rate barrel and muzzle-loader.com tech recommended hornady Great Plains 385g (which I could not even get started) then I got the power belt lead 348g and barely got that down. Was able to shoot two of those, but only after wet/dry patching the barrel til clean. Shooting 70g 2f

I’ve had in lines for years and love the process, but I’m not sure what I’m doing wrong or if there’s a chance my barrel is more narrow than it’s supposed to be.

Any help is greatly appreciated

Thank you from 5C PA

Mike

Are you using a ball starter ? Is the barrel smooth does it grab patches when you are cleaning it?

 

[Indy Durtdigger]

I have one of those and like yours the bore is tight. Not measured it but the only thing I can reliably load in it is a LEE REAL where only the top band engages the rifling when loading and they still take a good pop to get started.
Just a word of note. The forum police will get ya for mentioning any modern stuff, even projectiles.

 

[morehops52]

With that fast twist rate you definitely want to shoot bullets not balls. You might do a search on how to slug your barrel to get the correct diameter. If you want to discuss bullets with plastic thingys you'll need to go to the Modern forum.

 

[snakebit]

May try lapping your bore with Scotch bright pads. I believe the brown ones? Don't quote me on that though. You'll need an undersized jag.