• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Help identify a 2.5 inch cannon

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Desantii

32 Cal
Joined
Nov 28, 2022
Messages
3
Reaction score
2
Location
Lima
Hi any help identifying this cannon. This is from Peru in the 1800s so definitely of European origin. Passed along to me by my grandfather

2.5 in bore and out diameter about 3.5

Thanks so much
 

Attachments

  • E880D2BB-DDED-4851-A93A-9C0BEF777FEF.jpeg
    E880D2BB-DDED-4851-A93A-9C0BEF777FEF.jpeg
    1.3 MB
  • 86527721-F8D7-44DD-A2C5-4EBC11103349.jpeg
    86527721-F8D7-44DD-A2C5-4EBC11103349.jpeg
    2.4 MB
  • 1B187FDD-14B7-40A0-AAF4-2BFDF64FCD02.jpeg
    1B187FDD-14B7-40A0-AAF4-2BFDF64FCD02.jpeg
    3.1 MB
  • 08275983-86D5-4575-B92A-1AD00FC99CE6.jpeg
    08275983-86D5-4575-B92A-1AD00FC99CE6.jpeg
    2.7 MB
  • 587C807F-D9F7-4400-83CA-6D4E413FB2E7.jpeg
    587C807F-D9F7-4400-83CA-6D4E413FB2E7.jpeg
    1.8 MB
  • EA89E38A-BD17-41C7-A3DE-0BA7DD82AD98.jpeg
    EA89E38A-BD17-41C7-A3DE-0BA7DD82AD98.jpeg
    1.8 MB
  • 3D76449E-C8D9-461F-AAEB-8B83D2567ACD.jpeg
    3D76449E-C8D9-461F-AAEB-8B83D2567ACD.jpeg
    1.7 MB
We need a full side view. It looks like a line throwing gun. Perhaps a Lyle gun. Very hard to tell from the photos.
 
Last edited:
I think cleaning the copper tag at the breech will tell the story.

From the web I found the following info.....

A World War II era iron line throwing gun on carriage. The brass maker's plaque engraved "Sculler Safety Corp. No.2175, 122 Broad Street NYC". Same information emboseed in raised letters on iron carriage. Measures 34 1/2" overall in length x 12" wide. MFG. Sculler / Safety Corp. 122 broad St NY USA cast into the carriage. GHM- 2175 and SCULLER stamped into the end of barrel. 2 1/2 inch bore, 28 inch barrel and weighs approximately 200 pounds. Composed of Steel and brass.

HISTORY: Line throwing cannon (Lyle gun) fires a 18 pound projectile over 700 yards. They used these cannons to fire a line over the ship that was breaking up close to shore. They would then pull a larger line from the ship to shore and secure it for rescue operations. Line throwing cannons were replaced in the 1950's with rockets. Line throwing cannons were also used for ship to ship.

I think your gun is a pretty close match. I wish I could figure out how to copy a photo from a website.
 
I found another manufactured by Reading. I read there were over 30 makers of Lyle guns. Lets see what your tag reveals.
 
1670375867236.jpeg

Another early 20th century Lyle gun by Sculler / Safety Corp. your gun is missing the bronze band that the elevator bolt passes thru.

Overall a Very cool inheritance!
 
Last edited:
Thanks everyone from your help! Will see if I can get the plate cleaned to gleen some more info
 
I would bet the rent that it is a line throwing gun. That kind of carriage is distinctive.
 

Latest posts

Back
Top