-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Help me find a kit like this description
- Thread starter zzzippper
- Start date
Help Support Muzzleloading Forum:
Deer Creek has this kit. All the other kits are listed as "Sold Out".
Traditions Kentucky Pistol Kit .45 Cal Percussion - G5065 (deercreekproducts.net)
Track of the Wolf has a couple of Lyman kits that approach affordability but these are not 45 caliber.
Lyman Great Plains Rifle & Pistol Kits - Track of the Wolf
I'd also suggest that ordering a couple of the books on building Kentucky pistols from Muzzle Loaders Builders' Supplies would be a great starting point.
There's several pages of listings of books and videos.
Product Listing Books-Videos-Drawings (muzzleloaderbuilderssupply.com)
Track of the Wolf has a good selection of books too.
Traditions Kentucky Pistol Kit .45 Cal Percussion - G5065 (deercreekproducts.net)
Track of the Wolf has a couple of Lyman kits that approach affordability but these are not 45 caliber.
Lyman Great Plains Rifle & Pistol Kits - Track of the Wolf
I'd also suggest that ordering a couple of the books on building Kentucky pistols from Muzzle Loaders Builders' Supplies would be a great starting point.
There's several pages of listings of books and videos.
Product Listing Books-Videos-Drawings (muzzleloaderbuilderssupply.com)
Track of the Wolf has a good selection of books too.
Pedersoli makes a Kentucky Pistol kit.
Here is a list of the Distributors:
Here is a list of the Distributors:
| FULL DISTRIBUTORS |
|---|
| IMPORTERS AND DISTRIBUTORS |
| IFG-NA, LLC DBA ITALIAN FIREARMS GROUP 18250 I-40 West -Amarillo, TX 79124 / PO Box 300 - Bushland, TX 79012 - -
|
| BEAUCHAMP & SON INC., DBA FLINTLOCK'S ETC 160 Rossiter Road - 01254 - RICHMOND, MA.
|
| DIXIE GUN WORKS INC. Reelfoot Avenue - P.O.Box 130 - 38261 - UNION CITY, TN.
|
| CHERRY'S FINE GUNS 3408 West Wendover Ave. - Suite N - 27407 - GREENSBORO, NC.
|
| TAYLOR'S AND COMPANY, INC. 304 Lenoir Drive - 22603 - WINCHESTER, VA.
|
Thank you for taking the time to give such a detailed reply. The Muzzle Loaders Builders site is overwhelming!
From what I've found all the available level 1 kits for pistols are made by Pendersoli and Traditions. However I don't know if Traditions makes one in .45 caliber but Pendersoli does and the .45 Kentucky kit is on sale now at Dixie Gun Works for $295 in percussion, $325 for a flintlock.
Sorry, I just noticed the flintlock version is unavailable.
Thank you. I saw the Ped kit but I didn't see rifling information so I assumed it was smooth bore. Am I wrong?
https://www.dixiegunworks.com/index...0330+Pedersoli+Kentucky+Percussion+Pistol+Kit
https://www.dixiegunworks.com/index...0330+Pedersoli+Kentucky+Percussion+Pistol+Kit
No problem, we're crossing posts.
Can you send a link? Because I can't find it. Thanks!
Sitting fox, I’ve had a good experience with them. Track of the wolf is a number one in my book
According to the Pendersoli home page it's rifled, very shallow rifling.
Kentucky Percussion Model, Pistols Kentucky Pistol (1750-1850 c.) .
By the way, there are no instructions that come with the kit but I just finished a .54 caliber recently, duelist1954 made 3 videos of his build and we can help along the way.
Thanks, Grenadier, for suggesting Track of the Wolf. I slipped over and grabbed one of the Lyman pistol kits in .54 as a companion to my Great Plains rifle in .54. I currently have a CVA 50 cal Mountain Pistol (as a companion to a TC Hawken in .50) but have never been fond of the hardwood stock or the way it took a walnut stain; it's a bit cheesy, to say the least, and the 'basketball court' shine looks good to admirers at the range, but I surely want to buff that out with a good drubbing by steel wool. At least the Lyman has a walnut stock. The CVA shoots well and has a nice 40 year old patina, but maybe one day I'll figure out a way to fix that stock color.
Thanks and Cheers,
I will take you up on that!
Just keep in mind Duelist and I modified our builds, him more so than me but you don't have to. The most work involved will be rasping/filing and sanding the stock plus filing and sanding the brass ramrod pipes. The potentially most difficult will be fitting the sights, I found a triangular needle file was indispensable in this. Otherwise everything is fitted, all the holes drilled and the kit comes pre-assembled (except for the sights). Take it apart then go to work on it.
I kept this picture in front of me every time I worked on mine.
Here's my finished one.
I'm looking for one also. you have any luck finding one?
Similar threads
SOLD - Pending funds
SPF~~~~CVA Philadelphia derringer kit, 45 caliber
