Hopkins & Allen underhammer pistol.

[Gtrubicon]

Just stumbled into this over the weekend. I don’t think it was shot much. It’s got a mismatched replacement screw and the bluing was scrubbed off about a 3” section of the barrel. It’s a .45 cal. Looking for starting load info and proper disassembly information. I came up with .445 across the lands, is a .440 gonna need a mallet to get it going? Thanks for your help.

 

[Nobade]

I have one of those. It shoots best with light loads, 15gr or so. A .440" ball works fine, though my rifle version likes a .433" ball. You can try both to see what is better. Disassembly is simple - unhook the trigger guard from the hammer and remove the two screws. I am planning on reshaping the grip on mine, too much palm swell. But it does shoot quite well and is very effective on rabbits.

 

[Rifleman1776]

is a .440 gonna need a mallet to get it going?

It may. I used to sell H&A undies. Most needed a .433" ball. That is what I used in mine.

 

[springfield art]

Just stumbled into this over the weekend. I don’t think it was shot much. It’s got a mismatched replacement screw and the bluing was scrubbed off about a 3” section of the barrel. It’s a .45 cal. Looking for starting load info and proper disassembly information. I came up with .445 across the lands, is a .440 gonna need a mallet to get it going? Thanks for your help.

I'm up for one of those; you really shouldn't have to "mallet" anything! They're fun!

 

[springfield art]

I gotta get one! Had one of the plastic-grip ones many years ago; want one just like that! By 'that', I mean the wood handled one shown.

 

[garypl]

I have one that I love to shoot. A patched .440 ball is very tight so I have been loading 20 gr 3F with a Durofelt wad soaked in olive oil on top of the powder followed by a bare ball - shoots great at 15-20 yards!

 

[Gtrubicon]

My barrel has zero crown, is this the norm for these pistols?

 

[Nobade]

My barrel has zero crown, is this the norm for these pistols?

Pretty much. The rifles also. They can all benefit from a good crown job or even the sandpaper on your thumb treatment. Let it load easier and not cut patches.

 

[sheriff john]

Caution - been shooting the rifles over 50 years. Be absolutely certain you replace nipples with the exact ones that came with the gun. Easy to strip threads and not every one I've seen had the same one. Great shooting guns with fast,reliable ignition.

 

[springfield art]

My barrel has zero crown, is this the norm for these pistols?

It's so easy to crown them; I don't think when these were made and offered, that crowning was anything thought of at all.

 

[Rifleman1776]

Be absolutely certain you replace nipples with the exact ones that came with the gun.

Amen, Bro. Excellent advice. The nipples a different. A friend replaced his with a standard nipple and ended up shooting it into his arm. Not fun, don't do it.

 

[Gtrubicon]

I was able to get the nipple out of the gun, it is serviceable. It came with a new tin of #12 caps which fit perfectly, #11 caps don’t fit although my homemade caps do fit well. I was able to find a replacement #11 nipple specifically for this pistol at track of the wolf. I haven’t ordered it yet but when I do I will make certain the threads are the same. Thanks for the tip!

 

[springfield art]

I might be getting one of these soon, and really appreciate the tip!

 

[springfield art]

Pretty much. The rifles also. They can all benefit from a good crown job or even the sandpaper on your thumb treatment. Let it load easier and not cut patches.

Yep. I would use the black 'sand paper' with oil to do that with my thumb. Muzzleloaders can be really creative and resourceful!

 

[springfield art]

One thing about the under-hammers; even a klutz like me can figure out how to strip and re-assemble!!