How do you fill the powder horn?

[Cruzatte]

Years ago I bought a handy little copper funnel from Goosebay Workshops. Still have it, and use it for filling both main horn, and priming horn.

 

[hanshi]

One horn has a two sectioned tip. The tip has a plug that closes the hole but the lower part unscrews to reveal a larger hole for filling. The ones with just a plug in the tip get filled with a small funnel.

 

[nhmoose]

I fill mine with black powder

 

[Eddie Southgate]

Ted Cash funnel when it fits and like some of the others my hand when it don't .

 

[olskool]

well I have been handloading my own ammunition since 1967, so I have a few powder funnels. that is what I use,,,,,,,,,

 

[Bighorserider]

I use Goex powder. I cut the head off a .223 case and soldered it to a can cap after drilling a proper size hole in the cap. The cap fits all my cans and the spout is small enough to fit in all my horns.

 

[Grenadier1758]

I use Goex powder. I cut the head off a .223 case and soldered it to a can cap after drilling a proper size hole in the cap. The cap fits all my cans and the spout is small enough to fit in all my horns.

That works fine when GOEX came in a metal can. Most powders come in plastic cans and the lids no longer match.

What I have done is transfer the GOEX from the plastic can to a metal can and my pouring caps still work.

 

[Treestalker]

Go to Dollar General, buy a small plastic funnel with a tube that fits your horn. Cut off the tube and glue it to the holed lid of a plastic powder can. Instant karma!

 

[Larry (Omaha)]

I grab my horn in the web of my hand between the thumb and forefinger, closing up the gaps around the spout and pouring into the funnel made by the finger and thumb. Not too fast but it works ok and no extra stuff needed.

Exactly how I do it.

Me too
Flintlocklar

 

[Juice Jaws]

I use Goex powder. I cut the head off a .223 case and soldered it to a can cap after drilling a proper size hole in the cap. The cap fits all my cans and the spout is small enough to fit in all my horns.

Do the same as above.

 

[ugly old guy]

Brass funnel.

 

[Dibbuk]

I have an original brass powder funnel somewhere. It was made to fill flasks and horns. If I can find it, and figure out how to get the camera to upload, I will try to post a picture of it.

 

[appalichian hunter]

Next time you go to the doctors ask for a few of the funnel type things that he uses to look in your ear. Personally I have a small silver funnel I won on a blanket shoot years ago. And I fill the horns about 3/4 full.

 

[BJHabermehl]

Next time you go to the doctors ask for a few of the funnel type things that he uses to look in your ear. Personally I have a small silver funnel I won on a blanket shoot years ago. And I fill the horns about 3/4 full.

Brass funnel.

I’ve used a plastic squeeze ketchup bottle to fill my priming thingies and my powder horns. You can buy them in the dollar stores by the pair, for ketchup and mustard. You can fill a horn with almost no spillage in minutes, just stick the nozzle into the horn and squeeze. Best horn filler I’ve ever used besides honey bear containers. BJH

 

[Loyalist Dave]

Ted Cash Funnel



LD