You can talk about pyrodex on here but it doesn't work very well in a flintlock because it has a higher ignition temperature.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
I want to move on and experience flintlocks. Any suggestions as to a starter flintlock?
- Thread starter ormond tony
- Start date
Help Support Muzzleloading Forum:
- Joined
- Apr 7, 2012
- Messages
- 738
- Reaction score
- 994
My favorite youtube video was always this short movie... which I watch about once a month for some odd reason....
- Joined
- Apr 7, 2012
- Messages
- 738
- Reaction score
- 994
And this one I watch a few times every year (which is dangerous to health and gun if the ball does not seat. So can't recommend doing it, I never will try. But it illustrates the speed of a smoothbore over a rifle in war.
Mustakrakish
32 Cal
- Joined
- Mar 4, 2021
- Messages
- 23
- Reaction score
- 15
Crow-Feather
32 Cal.
I have been looking online for a good flinter. I would like to get the new Lyman/Pedersoli flint kit in 54 but they are hard to find. Pedersoli Frontier kits in 54 are also hard to find. I also have a taste for the TVM flint "in the white" kits but am still saving for the big day.
Pete G
76 Cal.
Don't go cheap. Get something worth having.
old ugly
40 Cal.
this is good advise. my first flintlock had a frizzen issue which made the gun very frustrating to use. if no other conditions matter make sure the lock works and sparks properly.
ou
- Joined
- Jan 9, 2008
- Messages
- 1,939
- Reaction score
- 2,187
My first flintlock was one that I built from parts, no kit. I started with a T/C percussion rifle and was curious about flintlocks, so I assembled one over the winter. Now, most of my muzzle loaders are of the flint variety.
drstrangelove
32 Cal.
- Joined
- Jan 24, 2012
- Messages
- 116
- Reaction score
- 40
That’s a beautiful rifle.Here ya go!
Untitled by Sharps Man, on Flickr
Leman flintlock/35" Sharon barrel/L&R Lock/Davis Set triggers and Birdseye Maple stock! 50 caliber!
Last edited by a moderator:
If you go for the TVM flint "in-the-white" kit, upgrade to the Chambers lock or a deluxe Siler. Shooting a flint lock rifle is so much better with an excellent flint lock.
Crow-Feather
32 Cal.
thank you, I will
There are plenty more knowledgeable here than me, but from what I understand, for a starter flintlock, the Lyman Great Plains Rifle is hard to beat. They are made in the town next over from me, I've shot a few, and for 600-700 bucks I can say I am a fan...
Nice video on knapping the flint in the jaws of the lock. Before knapping, and in a demonstration video, I would have made a point of dumping the powder left in the pan. You did wipe the edge of the flint and the pan so you did get rid of the pan powder. By the way, I call the tool you used to rest on the flint a knapping awl. That edge can be accurately placed on the dull edge and lightly tapped to break off a tiny flake as you move the awl along the edge of the flint. The soft iron of the knapping awl will drive off a percussive flake and being soft, will not generate a spark to set off the powder charge in the rifle. I also make a point of turning the rifle over to dump any flakes of flint from the pan. Not so important when shooting alone, but can be an issue at a range with other shooters. I liked your ring of tools. Nicely period correct, but that hammer? It certainly is functional, but jarring when it suddenly appeared. I would have taken a look at the edge of the flint after knapping to see if the edge was even to the face of the frizzen. Just my procedure.
Johnny Tremain
Silversmith in training
Hold on a sec, I have to pull up my flame proof breeches.....
Buy a kit, dont care if it is TOW, DGW, Jim Chambers, or Muzzle Loader Supply Co.
(where I got mine)
You can always spend a tad more that building and get one already made.
Ive found from 40 years of shooting this stuff that named branded rifles are 3rd world built production guns, and any of these kits are superior.
I did not say they were made in third world countries, I said they are produced like they were made in a 3rd world country.
Buy a kit, dont care if it is TOW, DGW, Jim Chambers, or Muzzle Loader Supply Co.
(where I got mine)
You can always spend a tad more that building and get one already made.
Ive found from 40 years of shooting this stuff that named branded rifles are 3rd world built production guns, and any of these kits are superior.
I did not say they were made in third world countries, I said they are produced like they were made in a 3rd world country.
Third time out with the GPR flintlock and it was great. Shot 4 times hitting the target at 25 yards, dry-patched twice, shot 3 more times. Hitting target and making a spark and SMOKE is great. Now I think it's only appropriate to give my GPR a buddy to hang around with, preferably a pistol of the flintlock variety. I would really like the Harper's Ferry pistol. Anyone have any ideas on a friend for my GPR?
Thanks for your input, I would like to build but I have a tremor in my hands, 71, eyesight is OK, patience is a bit less than OK. Is there a kit for me that doesn't involve buying more tools or demands precision work? Thanks.
Buckskinn
45 Cal.
Yes, Jim Kibler's rifles. Can easily get it done in a weekend with a couple basic tools. Although there was a guy over on the Gun Builder's Bench that had something like 130 hours into one of them... For the life of me I cannot figure out how that could be.
Maybe he took the time to do all the little things that separate the really good, well made rifles from the run of the mill "from the factory" ones that were just thrown together?
