Idea Help

[Smokey Plainsman]

Hi

I have an idea for a project I’d like done to my northwest trade gun. I’ve got one with a 42” long barrel and I’d like the barrel cut back to about 33” to make it handier. The gun has a blade front sight that I’d like to keep the same style of, but I am also wanting a simple low profile rear sight installed, something historically accurate.

Additionally, it’s got an L&R trade gun flint lock. I’d like it converted to percussion. Here is the gun:

I’d like to send it to a qualified gunsmith for the work. I can shorten the ramrod myself but would need it converted to percussion and the barrel shortened, front sight reinstalled, and a simple rear sight installed.

About how much would a fair price be for this work? Thanks!

 

[bud in pa]

To shorten the barrel I first marked mine with a plumbing pipe cutter. I followed that line with a hack saw. Then checked the squareness of the cut with a 3" machinists square. For soldering parts I use Brownell's Hi-Force 44. It only needs a propane torch. I like working with wood, much easier to cover up mistakes!

 

[Flintandsteel]

Makes more sense to sell it and buy something you really want.

 

[Smokey Plainsman]

Thank you, but I’m afraid the gun doesn’t exist.

 

[Clark Badgett]

Thank you, but I’m afraid the gun doesn’t exist.

What is it you want that doesn’t exist?

 

[Smokey Plainsman]

What is it you want that doesn’t exist?

If you can point me to such a gun please do. I desire a short handy Caplock northwest trading piece of 20 balls to the pound. It would probably need to be built....? I’m no buildsman myself.

 

[Grenadier1758]

@Smokey Plainsman, have you asked @Rob M. if such a gun could be built?

 

[Taevers]

Hi

I have an idea for a project I’d like done to my northwest trade gun. I’ve got one with a 42” long barrel and I’d like the barrel cut back to about 33” to make it handier. The gun has a blade front sight that I’d like to keep the same style of, but I am also wanting a simple low profile rear sight installed, something historically accurate.

Additionally, it’s got an L&R trade gun flint lock. I’d like it converted to percussion. Here is the gun:

View attachment 332092

I’d like to send it to a qualified gunsmith for the work. I can shorten the ramrod myself but would need it converted to percussion and the barrel shortened, front sight reinstalled, and a simple rear sight installed.

About how much would a fair price be for this work? Thanks!

Shortened to 32” would be fairly easy to do with the exception of probably having to add an upper ramrod pipe and reshape the forward tip. I too like a lil bit shorter and handier rig. Prolly take a craftsman a day to complete.

Sights added would help steer round ball a bit better. They wouldn’t be too expensive for a fella who has metal skills and tools. Another best part of a day. ( most guys that work on firearms work slow and carefully and listen to their podcasts)

Converting to percussion might be reconsidered. Caps are tough to get and flint trade guns are way cooler. ( imho) To my way of thinking, ifn I was going to do such a project, I would research how often they removed the pan and reconfigured the **** to percussion. I would guess it would have been done often. Be a fun hunt for the history of said conversion.

All said, I’d expect something along the lines of prolly 6 or 7 hundred dollars. Plus shipping. ( which wouldn’t be cheap either, but these one of a kind ideas always are.

 

[Taevers]

Hi

I have an idea for a project I’d like done to my northwest trade gun. I’ve got one with a 42” long barrel and I’d like the barrel cut back to about 33” to make it handier. The gun has a blade front sight that I’d like to keep the same style of, but I am also wanting a simple low profile rear sight installed, something historically accurate.

Additionally, it’s got an L&R trade gun flint lock. I’d like it converted to percussion. Here is the gun:

View attachment 332092

I’d like to send it to a qualified gunsmith for the work. I can shorten the ramrod myself but would need it converted to percussion and the barrel shortened, front sight reinstalled, and a simple rear sight installed.

About how much would a fair price be for this work? Thanks!

Shortened to 32” would be fairly easy to do with the exception of probably having to add an upper ramrod pipe and reshape the forward tip. I too like a lil bit shorter and handier rig. Prolly take a craftsman a day to complete.

Sights added would help steer round ball a bit better. They wouldn’t be too expensive for a fella who has metal skills and tools. Another best part of a day. ( most guys that work on firearms work slow and carefully and listen to their podcasts)

Converting to percussion might be reconsidered. Caps are tough to get and flint trade guns are way cooler. ( imho)

If you did want it percussion, I would want to know if it was common to remove the pan from the lock plate and convert the **** to percussion. I’m pretty sure resourceful fellows in scant country would have done said re configuration.

I’m guessing remodeling your rifle to your liking would be 6 or 7 hundred bucks. These rifles that are made just to our liking are always a lil pricey, but once a guy is on the hunt for one, a guy has to man up and push forward. Good luck, bud. Let us know how your project goes if it bares fruit.

 

[Taevers]

Shortened to 32” would be fairly easy to do with the exception of probably having to add an upper ramrod pipe and reshape the forward tip. I too like a lil bit shorter and handier rig. Prolly take a craftsman a day to complete.

Sights added would help steer round ball a bit better. They wouldn’t be too expensive for a fella who has metal skills and tools. Another best part of a day. ( most guys that work on firearms work slow and carefully and listen to their podcasts)

Converting to percussion might be reconsidered. Caps are tough to get and flint trade guns are way cooler. ( imho)

If you did want it percussion, I would want to know if it was common to remove the pan from the lock plate and convert the **** to percussion. I’m pretty sure resourceful fellows in scant country would have done said re configuration.

I’m guessing remodeling your rifle to your liking would be 6 or 7 hundred bucks. These rifles that are made just to our liking are always a lil pricey, but once a guy is on the hunt for one, a guy has to man up and push forward. Good luck, bud. Let us know how your project goes if it bares fruit.

I gotta learn way more about posting replies. I thought I lost the first one and re wrote the reply. No sense being an ***** with these puters if you don’t get a chance to show off once in a while!

 

[Rob M.]

What a shame .....
.oh well , to each their own ....

 

[Smokey Plainsman]

What a shame .....
.oh well , to each their own ....

Rob M, can you elaborate on this?

 

[Smokey Plainsman]

@Smokey Plainsman, have you asked @Rob M. if such a gun could be built?

Thank you, I have not. His work is amazing. But I’m not sure his build schedule and know most good builders have a backlog in the years.

 

[Rob M.]

Rob M, can you elaborate on this?

Can I elaborate ? Sure ... Its a shame you want to change that beautiful gun , I'm just crazy about Flintlock trade guns , but everyone is different so go with your changes and hope you get what you want

 

[Rob M.]

Thank you, I have not. His work is amazing. But I’m not sure his build schedule and know most good builders have a backlog in the years.

Very kind of ya .... Sorry , I dont build percussion arms ...

 

[barracudadave67]

Most Trade Gun conversions I've seen are ugly.

Dave

 

[Smokey Plainsman]

Very kind of ya .... Sorry , I dont build percussion arms ...

Rob, I understand. God bless, can’t get enough of your guns.

I might sale the gun I have. It’s just a bit too long for me and the barrel is a heavier profile than I’d like.

 

[Larry (Omaha)]

Very kind of ya .... Sorry , I dont build percussion arms ...

Love it! Keep them flinters flowin!
Larry

 

[Larry (Omaha)]

Hi

I have an idea for a project I’d like done to my northwest trade gun. I’ve got one with a 42” long barrel and I’d like the barrel cut back to about 33” to make it handier. The gun has a blade front sight that I’d like to keep the same style of, but I am also wanting a simple low profile rear sight installed, something historically accurate.

Additionally, it’s got an L&R trade gun flint lock. I’d like it converted to percussion. Here is the gun:

View attachment 332092

I’d like to send it to a qualified gunsmith for the work. I can shorten the ramrod myself but would need it converted to percussion and the barrel shortened, front sight reinstalled, and a simple rear sight installed.

About how much would a fair price be for this work? Thanks!

Smokey

Can't help you on price, there are too many variables with your need and also varibles in who charges what.
I really think you would be better to have one made to your specks. It would be more $$ in the end, but you would not ruin a fine gun and the end result would look like a custom gun, not a try to make it like I want it gun. You have cash right there in the one you want to modify.
Good Luck
Larry

 

[Smokey Plainsman]

Thanks, gang. I appreciate it greatly. Wouldn’t know the right builder tho and wouldn’t want someone without a good rapport.