My ramrod broke during shipping on my pedersoli. I bought a replacement and the jag I marking up the end of my barrels. It's supposed to be an exact replacement for me gun......is this something that's just bound to happen? May be a silly question but she's brand new so every scratch is like a dagger to the heart. It's going to be a field gun so it will get marked up but still....
Is this inevitable?
- Thread starter Acohill1
- Start date
Help Support Muzzleloading Forum:
My Pedersoli double barrel that I bought new has the same marks on it from the stock ramrod. I wouldn't worry about it. It's just from the brass tip rubbing up against the delicate finish on the barrels
Thank you so freaking much man you have no idea the stress u just lifed off my sholders.....
leadhoarder
45 Cal.
- Joined
- Nov 27, 2020
- Messages
- 995
- Reaction score
- 1,662
Not if you leave it hanging on the wall. Go shoot it and it will get worn in and looking right in no time.
- Joined
- Sep 16, 2019
- Messages
- 219
- Reaction score
- 250
Since it bothers you, try a tiny piece of clear tape on the rubbing zone & see if that helps.
That’s just brass deposit on the surface.
It’ll come off, you’ll find your bluing is untouched.
It’ll come off, you’ll find your bluing is untouched.
turn it down a bit.
Ditto that.
. If you try to remove it you will remove the bluing on the barrels and then you will be MORE stressed out
!
- Joined
- Jan 4, 2009
- Messages
- 276
- Reaction score
- 345
It's better that they're tight like that. To loose and the first shot can dislodge it and the second load will at best soot it all up and at worst will try to take it with it..
The only thing I see wrong is the lack of a cross pin to ensure the ramrod tip stays with the ramrod.
- Joined
- Jun 17, 2019
- Messages
- 8,505
- Reaction score
- 9,991
You have to be careful about "exact replacement" descriptions. The Dixie catalog said that about the ramrod for the Mississippi repro musket; it's actually a full 16th too thin, which doesn't sound like much, but is skinny and loose, and doesn't look at all military. For the cost and hassle of returning it, I didn't bother. It was a waste of money; get a proper size steel rod and work something out somehow, but "exact replacement" the Dixie is not, at least for my Mississippi repro.
Dude I just went thru this I returned the rod to track of the wolf and by the time I was done I had spent the price of a new rod..... as you said they have rods for the earlier models and mine was the later model version..... -_-
Good news tho I have reserved a range on Sunday to pattern my shotgun
Yours looks worn mine looks scratched lol
If you want to avoid ‘scratches’ keep your new gun packed in bubble wrap and wear clean white cotton gloves when you take it out to look at it. Or maybe put it in a locked display glass case. If you are lucky, no one will steal it. Otherwise, don’t over think things and run it through the briars, let the dog knock it over and stand on it, toss it in the back of your vehicle, you know, use it. Then smile when you get home and clean it up and repair when necessary. Mine has been getting honest wear since 1978. There is a big difference between use and abuse.
Lol I was joking like I said earlier it's going out into the field in a week or so. The first ding is always rough for me
Think of it as encouragement.
new2bp
40 Cal
- Joined
- Aug 18, 2021
- Messages
- 344
- Reaction score
- 507
One of my modern guns is known for tossing brass against the side of the receiver and marking it up. On those forums, we have a saying -
"Brass kisses mean you love your rifle and actually use it instead of leaving it in the safe"
"Brass kisses mean you love your rifle and actually use it instead of leaving it in the safe"
Similar threads
SOLD - Pending funds
Pedersoli 10ga
- Locked
SOLD - Pending funds
1757 Spanish Infantry Musket - NOT India Made
