Was able to pick this up and was curious of info on it. I believe it is a kit gun but not sure. I believe it is .50 cal rifled barrel. Also was able to get the hawk head thrown in. Pipe hawk and believe it is a cast one piece. Any info on these would be great cause it cost me my lunch and beer money for the week.
Jukar pistol info
- Thread starter Hanger
- Start date
Help Support Muzzleloading Forum:
They tended to be simple in form, but that one is the cleanest I've seen ... so go git her dirty!
Jukar was a company in Spain that was one of the first muzzleloading gun makers exporting them to the US after WW2. Jukars were imported and sold by Dixie Gun Works, Navy Arms, and CVA among others. The Spanish MZL firms Mendi and Jukar merged in 1980 and was then called Dikar, who I believe is now owned by Bergara.
Usually their arms would bear proof marks from the firm Eibar, which I believe was the official proof house for Spain, who has been making arms for 500 years. Apprentices from the gunsmithing trades at Eibar have gone on to have successful careers at prestigious firearm houses like the famous Holland & Holland in the UK.
Hopefully others can add in their 2-cents!
Jukar was a company in Spain that was one of the first muzzleloading gun makers exporting them to the US after WW2. Jukars were imported and sold by Dixie Gun Works, Navy Arms, and CVA among others. The Spanish MZL firms Mendi and Jukar merged in 1980 and was then called Dikar, who I believe is now owned by Bergara.
Usually their arms would bear proof marks from the firm Eibar, which I believe was the official proof house for Spain, who has been making arms for 500 years. Apprentices from the gunsmithing trades at Eibar have gone on to have successful careers at prestigious firearm houses like the famous Holland & Holland in the UK.
Hopefully others can add in their 2-cents!
Pretty dang sure this is a .45. If I remember right it was called a colonial belt pistol from CVA. A quick web search should give you proper cal. but these early guns were almost all in .45.
Last edited:
I have one in 45 caliber. Mine is a Jukar like yours. Flintlock was correct in that CVA called their version the Colonial Pistol. I paid $50 for mine about 5 years ago. The bore was great but that was it. I refinished the barrel and stock. And I added a new trigger guard and sights. In this current sci-fi reality, I’ve seen them sell for as high as $135. If you paid $85 for the pistol and hawk, as ol “Bear Claw” Lapp said to Jeremiah Johnson, “you done good pilgrim”.
I have had a couple of these. Sold them off to bankroll a revolver.
Not a bad little pistol really but I prefer revolvers. The ones I had shot fairly decent.
Now for $85 for a hawk and a pistol is a real bargain.
Not a bad little pistol really but I prefer revolvers. The ones I had shot fairly decent.
Now for $85 for a hawk and a pistol is a real bargain.
Flintlock_bob
40 Cal.
- Joined
- Feb 4, 2006
- Messages
- 183
- Reaction score
- 25
Mine is a .45
- Joined
- Mar 23, 2015
- Messages
- 5,018
- Reaction score
- 3,599
I had one as my first black powder pistol in flint and it was 45 and sold it many years ago. I have one now I picked up about 10 years ago and it is also flint and was most likely a kit gun someone built and it is 45 also. I bought that first one around 1974-75. If yours is a 45 it will take a .440 round ball with a fairly thin patch otherwise it will be a bear to load.
But, but,, that's not a Jukar,, the Breech screams H&A,,,,?
@Hanger, you will find a 0.433" ball easier to load than the suggested 0.440" ball. Using a 0.015" thick patch will give slightly better on target accuracy than a 0.440" ball and 0.010" thick patch and help in control of the fouling build up if you use black powder. I prefer the thicker patch with a damp lubrication to prevent gas blow by. You will determine the best load through load development.
Track of the Wolf I'm pretty sure carries .433.
. I bought a Lee mold before everything went mental and disappeared. .437 may work but still pretty snug.
Interestingly enough, a guy at work gave me this gun the other day and as I was attempting to take the lock apart, the "pin" on the front of the mainspring broke.
Not to steal a thread but I thought it appropriate because the lock plate on yours looks just like this one. What kind of lock would I call this to search for a new mainspring? It appears to resemble the MS on a Becky lock if I remember correctly.
Any help would be appreciated. This barrel is stamped with what appears to be 12mm? Caliper mic'ed at about 40ish caliber.
Not to steal a thread but I thought it appropriate because the lock plate on yours looks just like this one. What kind of lock would I call this to search for a new mainspring? It appears to resemble the MS on a Becky lock if I remember correctly.
Any help would be appreciated. This barrel is stamped with what appears to be 12mm? Caliper mic'ed at about 40ish caliber.
Attachments
Yeah, so does Dixie Gun Works. Hornaday also makes a swaged .433 round ball.
Similar threads
- Locked
