• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Kentucky from a piece of this and a part of that.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 18, 2023
Messages
297
Reaction score
412
Location
usa
Inexpensive parts build. Pedersoli stock, Bondini NOS barrel, CVA lock, Ted Cash thimbles, nose cap and rear sight, Log cabin shop trigger guard. Not the look I was going for but its ok. Really wanted an old look, not new. Note how the trigger guard is more like a bronze and it is harder than regular brass. Side plate had a name and not liking the bubbles in my erasure job. If anyone has a pedersoli Kentucky side plate I would buy it.
 

Attachments

  • IMG_3355.JPG
    IMG_3355.JPG
    1,023.8 KB
  • IMG_3356.JPG
    IMG_3356.JPG
    952.6 KB
  • IMG_3357.JPG
    IMG_3357.JPG
    669.1 KB
  • IMG_3358.JPG
    IMG_3358.JPG
    1.6 MB
  • IMG_3359.JPG
    IMG_3359.JPG
    1 MB
  • IMG_3360.JPG
    IMG_3360.JPG
    2 MB
the lock will be your biggest disappointment with your creative build.
You may be right about that. That lock was very difficult to adapt to this setup. This lock does have a bridle and a fly which is unusual for a CVA. I have a new traditions flintlock lock and it does not have either a bridle or fly. Worse comes to worse I will have a spare parts inventory for it. I already bought an NOS frizzen just because.
 
Back
Top