• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Kentucky pistol twist rate

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jon8777

32 Cal
Joined
Oct 3, 2022
Messages
14
Reaction score
4
Location
16002
What is the accurate range on twist rates on a 50 cal 10" kentucky pistol?

With the lack of 1:20 twist barrels can you cut a 1:48 down to 10" and still have accurate pbr shots at 25-30 yards?
 
What is the accurate range on twist rates on a 50 cal 10" kentucky pistol?

With the lack of 1:20 twist barrels can you cut a 1:48 down to 10" and still have accurate pbr shots at 25-30 yards?
Yes you can as a patched ball requires very little twist to stabilize. I made a horse pistol with a nine inch barrel from a one in sixty pitch rifle barrel in .54 cal that is very accurate to the fifty yards tested.
 
I read somewhere that the standard for single shot pistols back in the day was 1/4 turn for the length of the barrel. So a 1:48 cut down would be close to that.
 
That is what I was figuring, I didn't want to hack a rifle barrel and find out there is an issue.

I have shot large bore rifle calibers from pistols with similar twists and have no noticeable accuracy issues out to 200 yards.
 
Back
Top