Kibler lock rebuilds

[Buff1958]

I have built 5 kibler this year. 2 of the locks were just not as smooth as the other 3.
I sent the worst one back to Kibler and they misplaced it and after 6 weeks sent me a replacement.
I boxed it up with the other one and sent them to cabin creek.
All I can say is wow they do great work. light pull with no creep. I am very happy with them.
The lock on my October county .62 is hard on flints and will fail to spark occasionally. I shipped it off this morning.

Anyone having any problems with their lock should consider having them tune it. I am very happy I did

 

[wattlebuster]

Just curious but what lock is on a/your October country. Ive never owned one ar even seen one?

 

[Buff1958]

Just curious but what lock is on a/your October country. Ive never owned one ar even seen one?

I believe it is a chambers lock

 

[olskool]

i have built 16 Kibler's with #17 on the way next week. i have seen only one lock with the slightest problem. it would not clamp the flint tight as the screw for the jaw needed another thread turned in, i did that with a square bottom tap and it was fine. other than that, they have all been perfect,,,,,,,,,,,,,,,,,,,

 

[Buff1958]

i have built 16 Kibler's with #17 on the way next week. i have seen only one lock with the slightest problem. it would not clamp the flint tight as the screw for the jaw needed another thread turned in, i did that with a square bottom tap and it was fine. other than that, they have all been perfect,,,,,,,,,,,,,,,,,,,

All of mine functioned fine. 2 of them were 5 pounds the others 3. After shooting the 3 pounders the 5 pounds felt like 10

 

[M. De Land]

I have built 5 kibler this year. 2 of the locks were just not as smooth as the other 3.
I sent the worst one back to Kibler and they misplaced it and after 6 weeks sent me a replacement.
I boxed it up with the other one and sent them to cabin creek.
All I can say is wow they do great work. light pull with no creep. I am very happy with them.
The lock on my October county .62 is hard on flints and will fail to spark occasionally. I shipped it off this morning.

Anyone having any problems with their lock should consider having them tune it. I am very happy I did

I think most production locks can stand some tuning CNC produced or not !

 

[James Kibler]

We're sorry if we misplaced your lock. Just a reminder... We stand behind our products 100%. If you think something isn't right, send it back and we will make it right if there is something wrong.

As to tuning, I totally disagree. This is something that the average builder shouldn't monkey with. They will do more harm than good.

 

[Songwriter]

They will do more harm than good

I know I would.

 

[Buff1958]

We're sorry if we misplaced your lock. Just a reminder... We stand behind our products 100%. If you think something isn't right, send it back and we will make it right if there is something wrong.

As to tuning, I totally disagree. This is something that the average builder shouldn't monkey with. They will do more harm than good.

No doubt great customer service
That is why you have sold me 5 guns this year.
You volunteered to tune lock for free, even yit was fully functional

Thanks for a great product

 

[FlinterNick]

I think most production locks can stand some tuning CNC produced or not !

Most of the time a lock is not working right was not built well from the start, or … its just older and has depreciated with use. Kibler locks and other CNC made locks generally just need to be cared for, cleaned and lubricated.

 

[M. De Land]

Most of the time a lock is not working right was not built well from the start, or … its just older and has depreciated with use. Kibler locks and other CNC made locks generally just need to be cared for, cleaned and lubricated.

If a frizzen bounces or does not spark properly then the lock can stand some tuning no matter who's it is ! Computer numerated control of machinery (CNC) is not magic and the machines and metal cutting tools controlled by it need calibration and sharpening involving plus and minus tolerances just as any other machinery with time and wear. It is a terrific tool for consistent tolerance in mass production but is only as good as it's machine maintenance and tooling calibration schedule that it controls.
Not all folks are equiped or capable of tuning there own locks and may need help in achieving best preformance but knowing what to look for and where to get them tuned up to potential is important to know.

 

[FlinterNick]

If a frizzen bounces or does not spark properly then the lock can stand some tuning no matter who's it is ! Computer numerated control of machinery (CNC) is not magic and the machines and metal cutting tools controlled by it need calibration and sharpening involving plus and minus tolerances just as any other machinery with time and wear. It is a terrific tool for consistent tolerance in mass production but is only as good as it's machine maintenance and tooling calibration schedule that it controls.
Not all folks are equiped or capable of tuning there own locks and may need help in achieving best preformance but knowing what to look for and where to get them tuned up to potential is important to know.

Ok.. send your lock to October country i suppose… or if it’s a Kibler, send it to Kibler, have at it.

 

[wiscoaster]

Kibler will make his locks work right, no extra charge. And they're good enough right out of the box they shouldn't need any "tuning".