• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Mag Spark

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I bought one to have when caps get short in supply. I then was able to get a good supply of caps and I now hope to never have to use it. I have no doubt it will work but the process to reload is a lot more complicated with them.
 
I bought one to have when caps get short in supply. I then was able to get a good supply of caps and I now hope to never have to use it. I have no doubt it will work but the process to reload is a lot more complicated with them.
I am seriously short on caps and refuse to pay scalper prices
 
I bought a rifle with one on it. They definitely work but like leadhunter said they are a little time consuming to unscrew, load and retighten. When I bought the rifle caps were abundant so after a couple shots I removed it and went to standard nipple. I still have it if ever needed though.
 
A Mag Spark came with a gun I purchased from the Forum Classified not that long ago. Although it worked, I have enough trouble dropping things like percussion caps, let alone small pieces like a primer firing pin assembly component, that I wouldn’t consider using one in hunting situations without spares for the droppable items. I carry extra caps (or flints) when hunting. Drop the Mag Spark firing pin assembly into the leaves, mud or snow, and you are potentially done without a spare.

Another thing to consider, while percussion caps are difficult to find today, 209 primers disappeared for a stint not that long ago. If you are committing to using primers, suggest a thousand minimum, unless you don’t shoot much. Also would suggest Federal brand based on experience for consistency. I know I can go through a lot of caps when I am shooting percussion. Not sure of my exact inventory, but have north of 10k. When I was actively shooting SASS I would go through 200 or more a month (2400 plus per year) for SASS alone. These components don’t seem to be getting any cheaper. Now is the time to buy, whatever it is that you are using.
 
Last edited:
Tried out putting them on TC Renegades and on Lyman GPR's.

Note: Over time the dimensions on GPR's changed a little, nipples length changed and this can effect how the hammer engages the Mag Spark depending upon when your GPR was birthed. I don't know precisely when that change happened but I do have an older GPR that is effected by this. Didn't know what was going on with that until I learned there were two lengths of nipples marketed for GPR's due to the change. So for that particular second hand GPR I use aluminum bronze nipples seeing as about thirteen years ago the bore was altered to a fast twist forty.
 
I like the ones I've used. I was having trouble with double strikes needed to fire caps because of a bad nipple and couldn't find caps any way. The mag spark seems to make it foolproof but it does take a little more time to load. Bonus was I found a lot of 209 primers much cheaper than the non existent caps at the time.
 
Back
Top