I was at a shop and found what looks to be an unfired 1860 pistol look up date it was made in 2007. The owner had it in the back of the case with no price. I looked at it and asked him the price he said $100 he said theirs a holster with it.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
My 1st black powder pistol
- Thread starter Robertakamagoo
- Start date
Help Support Muzzleloading Forum:
rafterob
62 Cal.
What a steal!
The own said it came with the shop when he got it. He said he doesn’t like black powder. He did have a 32 caliber colt black powder pistol brand new in the box. The price was $600
- Joined
- Jan 30, 2021
- Messages
- 1,045
- Reaction score
- 1,118
.32 caliber Colt?
32 or 34 I will take pictures next time
Maybe 36 cal?
No I think it’s a 34 I’m was looking at fast.
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,659
- Reaction score
- 24,220
- Location
- Louisiana & My camp in Mississippi
Well, you got a heck of a good deal. Congratulations!
- Joined
- Feb 22, 2022
- Messages
- 558
- Reaction score
- 760
WOW, GREAT DEAL!
paid a $100 for a gun in your hand....sounds like armed robbery
- Joined
- Nov 16, 2009
- Messages
- 4,555
- Reaction score
- 8,121
It’s a .45. 1860 Colt Army and it uses .457 or .454 ball or conical bullets… made in 1994, And you should be locked up for larceny!
It had a BD in a square I will recheck when it get home. I was thinking it’s a 44 caliber.It’s a .45. 1860 Colt Army and it uses .457 or .454 ball or conical bullets… made in 1994, And you should be locked up for larceny!
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,659
- Reaction score
- 24,220
- Location
- Louisiana & My camp in Mississippi
They were called .44s but were actually.45s. Just like the .36 revolvers, they’re actually .38s. Confusing, but that’s the way they made them in the day and reproductions.
Nice job on running that deal down!!!!!!!!!!!!!!!!!!!!
As a side bar and since this is your first BP pistol ..please be aware that the wedge is not properly or safely installed as the spring lock built into the wedge is not in place ..so pleaze correct before shooting ..it also appears to be cocked in the slot channel and you might have some trash in the arbor pilot hole that is keeping the barrel assembly from going to battery
Enjoy that great buy
Bear
As a side bar and since this is your first BP pistol ..please be aware that the wedge is not properly or safely installed as the spring lock built into the wedge is not in place ..so pleaze correct before shooting ..it also appears to be cocked in the slot channel and you might have some trash in the arbor pilot hole that is keeping the barrel assembly from going to battery
Enjoy that great buy
Bear
Thanks
The 1849 pocket and the early Patterson Colts were 32 caliber.
The manufacturers were just beginning to define bore sizes. The bore on muzzleloading rifles was defined by the land to land diameter. The land to land diameter on a 44 caliber cap and ball pistol is about 0.440. The groove to grove diameter is about 0.451. The forcing cone compresses the soft lead bullet to the groove to groove diameter. So, a 44 caliber cap and ball revolver uses a 45 caliber bullet or ball.
The 1849 pocket and the early Patterson Colts were 32 caliber.
The manufacturers were just beginning to define bore sizes. The bore on muzzleloading rifles was defined by the land to land diameter. The land to land diameter on a 44 caliber cap and ball pistol is about 0.440. The groove to grove diameter is about 0.451. The forcing cone compresses the soft lead bullet to the groove to groove diameter. So, a 44 caliber cap and ball revolver uses a 45 caliber bullet or ball.
I gauge pin the bore it takes a .439 pin the C bore takes a .441 pin.
