My brother forgot the powder.........
- Thread starter Macon Due
- Start date
Help Support Muzzleloading Forum:
- Status
- Joined
- Mar 4, 2013
- Messages
- 308
- Reaction score
- 216
'evening,
My neighbor was given a caplock, and was pretty sure it was loaded. Since he knows I mess with them more than he does, he came to me.
Yup, it was loaded, and since we didn't know with what (guy that gave it to him only shoots modern, so we didn't want to unload it by firing), out comes the worm. That wouldn't bite, so I tried the ball screw. Many hours of cursing later, I finally got it out.
Jacketed bullet in a sabot, but it had a plastic point on it. By luck, I got the screw into that and it bit enough to get it out.
Macon, you may want to try a ball screw. Especially if your brother can confirm the type of bullet in there. It takes a lot of luck, and a good bit of patience to get the screw started where it needs to be.
Mike
My neighbor was given a caplock, and was pretty sure it was loaded. Since he knows I mess with them more than he does, he came to me.
Yup, it was loaded, and since we didn't know with what (guy that gave it to him only shoots modern, so we didn't want to unload it by firing), out comes the worm. That wouldn't bite, so I tried the ball screw. Many hours of cursing later, I finally got it out.
Jacketed bullet in a sabot, but it had a plastic point on it. By luck, I got the screw into that and it bit enough to get it out.
Macon, you may want to try a ball screw. Especially if your brother can confirm the type of bullet in there. It takes a lot of luck, and a good bit of patience to get the screw started where it needs to be.
Mike
Justin.44
54 Cal.
Here's a video from Black Powder Maniac Shooter demonstrating that with a flintlock.So, how to remove dry ball from a flint lock? Asking for a friend
This is a bit easier if @Rusnapperhead's friend's flint lock rifle has a chambered breech or e removable vent liner. See @FishDFly's post above. But all is not lost if you have a non-removable vent liner or a drilled touch hole.
See if your friend has 4fg powder for priming. The 4fg powder can be poked through the touch hole. This requires a steady hand and some patience. May need to poke powder through the touch hole several times, but eventually the dry ball will be shot out.
See if your friend has 4fg powder for priming. The 4fg powder can be poked through the touch hole. This requires a steady hand and some patience. May need to poke powder through the touch hole several times, but eventually the dry ball will be shot out.
Thank you, all he remembers is it was a jacketed bullet and a hollow point.
Macon
tomm9903
40 Cal
As a gunsmith I have seen it.
RoaringBull
40 Cal
If it is a hollow point the screw-type ball extractor MIGHT be able to get down into the hollow and get a good grip on the bullet.
They make Zerk fittings in many thread sizes, both imperial, and metric. I wouldn't be surprised if there were some whitworth or british standard threads out there as well.
I have done it, but I blame "adkmtnken" he was talking to as i was loading. And he kept talking so the very next shot was a quiet poof. All powder, no ball.
There is an advantage to having 4F or 7F on hand to help with oops. Be hard to poke 2F thru a small hole.
Johnny Tremain
Silversmith in training
Get a rope....
S.Kenton
58 Cal.
Funny
After 3 pages, guess need to put a rope on the guy who put a "jacketed bullet" in a barrel.
- Joined
- Jun 17, 2019
- Messages
- 8,531
- Reaction score
- 10,017
Sounds like the Best Plan!CO-2 discharger.
Forum Rule 9: We do not discuss copper and/or jacketed, plastic/polymer tipped bullets, sabots, power belts, or other 'plastic-wrapped' bullets. Smoothbores using plastic wads and steel shot are an exception to this rule.
Based on rule 9 and the fact that this thread has over 55 posts, some of them answering the original question, I'm closing this topic.
Based on rule 9 and the fact that this thread has over 55 posts, some of them answering the original question, I'm closing this topic.
- Status
