• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Napping your flint

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Same here, I use a brass carriage bolt. I acquired a large quantity of large brass bolts and copper rivets from another shop I bought and the brass bolt works better than I expected. I just rest the bolt threads on the edge of the flint and lightly tap with the back of my knife from corner to corner for a clean sharp edge. Cock and spark a couple of times to true the edge and your good to go. You just need to find a bolt 5/16" to 3/8" in diameter and about 2" inches long.View attachment 194646
Thank you for sharing this. Great idea.
 
Lots of good information here!
But I have not heard yet:
Do I start from the Right side of the flint and work to the left or the Left side and work to the right?
And does it matter if I stand Behind the flint or in Front of it?

And to think, all this time I have been using my teeth!
 
Back
Top