Need bullet
- Thread starter Cutter56
- Start date
Help Support Muzzleloading Forum:
Phil Coffins
69 Cal.
Here’s what you need. Proper Sharps bullets that you can cast from pure lead. Molds offered by a few makers and an internet search will find them made up for sell.
773C485A-D99C-4186-9874-E93602FF6E4A by Oliver Sudden, on Flickr
773C485A-D99C-4186-9874-E93602FF6E4A by Oliver Sudden, on Flickr
You had already started a thread on this subject and had some replies there, I wonder why you stared a new one. It can be quite confusing. You might consider asking a moderator to combine them both into one for your benefit as well as that of everyone else. 
https://www.muzzleloadingforum.com/...lets-for-my-18-63-shirps.144746/#post-2038434
https://www.muzzleloadingforum.com/...lets-for-my-18-63-shirps.144746/#post-2038434
What make are those bulletsHere’s what you need. Proper Sharps bullets that you can cast from pure lead. Molds offered by a few makers and an internet search will find them made up for sell.
I am new to this form I seen another place to put a post and thought it was a different section and not seen by the same people thank you for letting me know that they are all connectedYou had already started a thread on this subject and had some replies there, I wonder why you stared a new one. It can be quite confusing. You might consider asking a moderator to combine them both into one for your benefit as well as that of everyone else.
https://www.muzzleloadingforum.com/...lets-for-my-18-63-shirps.144746/#post-2038434
Phil Coffins
69 Cal.
Those are from a mold made by Moose Molds, Lee Precision makes one nearly the same. Both are good molds.
I was going to ask the same question- Mold by Moose Moulds- any part number, what do they weigh, do they cast exactly .535.
Are the bullets you posted a photo of the Sharps Christmas Tree or the Sharps Ringtail bullets? Here is the link-Moose Moulds
Do you know the number for the LEE MOLD?
MIKE
Are the bullets you posted a photo of the Sharps Christmas Tree or the Sharps Ringtail bullets? Here is the link-Moose Moulds
Do you know the number for the LEE MOLD?
MIKE
https://moosemoulds.wixsite.com/mm2013/sharpsxmashttps://moosemoulds.wixsite.com/mm2013/sharps-rthttps://moosemoulds.wixsite.com/mm2013/trashcan-rt
Lee does not make a Sharps mold. They did a special one time run double cavity mold commissioned by an individual several years ago and to the best of my knowledge he sold out. The bullet was a copy of a Sharps bullet Ray Rapine offered in his line of molds. I have only ever seen one offered (eBay) and I bought it.
Steve Brooks offers 2 Sharps molds but sit down and put your coffee down before you look at them, they are quite expensive and he says they are only to be used with Saeco handles. His service and workmanship is first class.
https://brooksmoulds.com/basepour.html
Lee does not make a Sharps mold. They did a special one time run double cavity mold commissioned by an individual several years ago and to the best of my knowledge he sold out. The bullet was a copy of a Sharps bullet Ray Rapine offered in his line of molds. I have only ever seen one offered (eBay) and I bought it.
Steve Brooks offers 2 Sharps molds but sit down and put your coffee down before you look at them, they are quite expensive and he says they are only to be used with Saeco handles. His service and workmanship is first class.
https://brooksmoulds.com/basepour.html
Thanks
