Need help finding a 50 Caliber mold

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Dec 20, 2020
Messages
70
Reaction score
61
Location
Pottstown, PA
So I seem to be looking for a needle in a haystack and I am at a loss. Awhile back I purchased some Minnie balls from someone on this site but they didn't know much about them. Included in the lot were some Maxi balls, Lee improved Minnie and of course the one that nothing is known about.

That is the one that shoots the best out of my gun. Off hand 30-50 yards shots touching. I have about a dozen and a half left. So I need to replicate this bullet. Pictures are below

OAL is 0.91"
Diameter is .55(ish)
3 Lube rings with a pointed head.
Base is hollow, 0.37" cavity
Weight is right around the 340Grain average. Some being a little lighter and some being a little heavier.

I thought I found it on Track of the Wolf based on the pictures and stats on the website but what was delivered was the Lee Improved Minnie. They shoot ok but not like this one. Any help is greatly appreciated!

If it is not a production mold of some kind is there a company or person who could make a mold based on a sample?
 

Attachments

  • PXL_20241230_221326175.jpg
    PXL_20241230_221326175.jpg
    375.1 KB
  • PXL_20241230_221334817.jpg
    PXL_20241230_221334817.jpg
    399.9 KB
  • PXL_20241230_221342485.jpg
    PXL_20241230_221342485.jpg
    379.3 KB
  • PXL_20241230_221346601.jpg
    PXL_20241230_221346601.jpg
    388.4 KB
  • PXL_20241230_221550697.jpg
    PXL_20241230_221550697.jpg
    2.8 MB
  • PXL_20241230_221656966.jpg
    PXL_20241230_221656966.jpg
    2.4 MB
  • PXL_20241230_221725563.jpg
    PXL_20241230_221725563.jpg
    3 MB
  • PXL_20241230_221752217.jpg
    PXL_20241230_221752217.jpg
    2.5 MB

Latest posts

Back
Top