Steve in Maine
32 Cal.
- Joined
- May 15, 2005
- Messages
- 5
- Reaction score
- 0
Having heard such good things about the Crocket .32, I picked one up from Auctionarms for 250.00, including UPS shipping. I have some questions about it, as it is my first sidelock muzzleloader:
-The aluminum ramrod disappears completely inside of the barrel. Is there enough ramrod with the factory supplied rod to seat the load all the way??
-It looks like I must remove the tang screw each time I remove the barrel. Will the wood under the screw hold up to the repeated removal of the screw?
-What is the best tool to punch out the barrel wedge?
-I have some Goex 3f, some .310 roundballs, and some #1 buckshot to try. Any advice?
Many thanks,
Steve in Maine
-The aluminum ramrod disappears completely inside of the barrel. Is there enough ramrod with the factory supplied rod to seat the load all the way??
-It looks like I must remove the tang screw each time I remove the barrel. Will the wood under the screw hold up to the repeated removal of the screw?
-What is the best tool to punch out the barrel wedge?
-I have some Goex 3f, some .310 roundballs, and some #1 buckshot to try. Any advice?
Many thanks,
Steve in Maine