nipple size

[sr500]

Hi guys. CCI 11 nipple 6-1mm, is that a shorter nipple then a 6-1mm RWS no11, nipple? I think that i get a better angle to the hammer, with a not so high nipple. Tommy.

 

[Britsmoothy]

:hmm: Got me all confused there :hmm:

Brits :thumbsup:

 

[ohio ramrod]

Good question, here stateside we don't get rws nipples, caps yes- nipples no. If you know some one with a lathe you could have the nipples shortened.Or if you have a drill press and a sharp file you could do it yourself :hmm: :hmm:

 

[sr500]

I did se on TOTW site, that there are nipples for CCI and rem no 11, then there is nipples that say just for caps no 11. I did se on some pictures, that there is nipples that looks a lot shorter, with a lot thinner waist. Or that maybe is for revolver? I was thinking of the pictures on the TOTW site. There is a picture of four nipples, and the two on the left is a lot shorter with a thin waist.

 

[Paul R]

If you email direct to TOW site, you should be able to get a valid answer to your question. There is a wealth of information on this forum, but for that specific info, go straight to the source.

Paul