A peep sight works great for me. Like you I'm far sighted and can see fine at distance but now need magnification to read the menu. I can still see my iron sight just fine, but a peep brings everything into focus.
Old eyes and iron sights
- Thread starter Timber
- Start date
Help Support Muzzleloading Forum:
Actually it's someone else's tarifs that cut off supply and the present demand that caused the price of the 1.00 diopter reading glasses to $1.25.1.000 readers at the dollar store? Bidenomics its working
Front sight press.
Unless you are shooting flying. At that point sights are a malevolent distraction. As a child did you never squirt another kid with the garden hose? Did you need a sight?
Unless you are shooting flying. At that point sights are a malevolent distraction. As a child did you never squirt another kid with the garden hose? Did you need a sight?
LOL I could always hurl a dirt clod and pop you in the head as good as anybody. But, the idea of just slinging lead downrange, in the general direction of what you are shooting at, does not appeal to me. "Only accurate rifles are interesting." (COL Townsend Whelen).
Note my first sentence. "Front sight. Press." That is aiming, not just flinging. Flying birds with shotguns are different. You want to bring about the intersection of a column of shot with a rapidly moving target. Your success rate aiming with that little round bead will be miserable.
This combination of ghost ring rear and firesight front illustrates that point of front sight, press. I can use it accurately out to 125 yards, the max distance my bullet/gun combo works effectively.
You must be a mind reader. I just bought a set of those. Only problem is the rear sight base is for a 15/16" barrel and the rifle I want to use it on is 7/8":
I'll have to sort that out (shims, machining, etc)
Try overlaying the barrel with saran wrap, lightly fill the underside of the sight with JB weld after filling the screw holes with putty. Place firmly on barrel and hold in place with rubber bands. Allow to set, clean it up and you have a perfect fit. I recommended those way early in this thread.
Also I am not using the peep, rather the ghost ring instead...fits the same base
Also I am not using the peep, rather the ghost ring instead...fits the same base
If you have a 1" ATF, place sandpaper on the barrel and sand the sight down to fit the 1" Takes about 15 minutes and a beer.
Kmcmichael
45 Cal.
- Joined
- Feb 11, 2021
- Messages
- 608
- Reaction score
- 1,014
Regarding the front bead, I think it is advantageous For shooting flying. One must avoid looking directly at it and concentrate totally on the target. I have never observed a target shooter remove the bead Or a serious bird shooter remove the bead.
When we were kids it was very common to throw dirt clogs at one another - one such day someone threw one at a kid and put his eye out - very sad day indeed
. I will never forget that day.beardedhorse
Pilgrim
- Joined
- Apr 10, 2014
- Messages
- 491
- Reaction score
- 390
They make iron ghost ring sights to replace a conventional rear sight. In some matches it would not be considered an open iron sight nor a buckhorn sight with the horns touching. If you take a saw and file to make a slit would this be an "open" iron sight? Chorizo's system is just the ticket for a hunting rifle. More and more of the shooters are using high viz sights on their rifles in open or handicap matches, especially with seniors.
