• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Opinions Requested on Next Kibler SMR Caliber

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I ordered mine in 40 caliber. The .36 i was using just wasn’t consistent enough at 75 for target shooting. Even the 40 requires a well placed shot to drop steel.
 
For those of you who have a Kibler SMR in .32 would it be possible to show us the balance point on the rifle?

Yes, I know it will be slightly different due to wood and wood density but close enough for me to make a decision.
Here is the balance point on my .32 in maple.
IMG_20241124_073544552_HDR.jpg

IMG_20241124_073556347_HDR.jpg
 
My .36 is just a bit behind the pictured .32's. Net is...with that long skinny barrel, the caliber choices don't make a lot of difference in weight or balance point. Offhand in the field, I know I'm not good enough to have a few oz of weight or half inch balance point difference matter.
 
Gentlemen, I am amazed.... Here is my Kibler SMR in .45 with a standard grade maple stock as you can see the balance point is not that different than your .32's

I would have guessed mine would be further back toward the action and I would have been wrong.

Thanks all!
Oh wait!
You guys are just trying to get me to buy another Kibler aren't you!

Kibler SMR balance point.jpg
 
I think I’m gonna order a kit with a .36 barrel and an extra .45 for deer season. Best of both worlds!
 
Back
Top