Sorry for the delay on an update, I got the barrel blued and most of the brass filed, sanded then polished. I am also on my 7th coat of Tru oil. Not sure how many coats I need but the small pores don’t want to fill. Really hesitant to use any steel wool or sand paper to bring the finish down to reapply to fill the pores. I did make a phone call to Birchwood Casey and was told to leave the stock cure for 2 weeks before any aggressive handling. I am doing the refinishing in my basement that’s about 60-70 degrees and 30ish % humidity. Allowing 12 hours between coats.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Pedersoli Scout .32 cal Kit Help
- Thread starter Leadriver
- Start date
