peep height adjustment for T.C. peep

[mrd]

Anybody have a ballpark figure on how high one full turn on the height would get me on a T.C. tang peep sight?

 

[morehops52]

One turn will change a different amount based on distance to target. Also depends on what brand the sight is. My experience is one turn will change your POI but not significantly unless you are competitive target shooting. A deer at 30 yrds probably wouldn't notice much change at all.

 

[mrd]

Sight in is 85 yards peep is Thomson Center tang sight if that helps

 

[morehops52]

I'm sorry that I can't give you a more specific answer. It's been a while since I have sighted my peeps in. I've been doing it long enough (4 peeps) that when adjustments were needed I just dialed in some guesstimate Kentucky windage and it usually got close enough that only a slight tweak was needed. I honestly can't convert KW and tweaks into clicks
I would suggest using a solid rest and shoot a 3 shot group. If possible to lock your rifle in the rest, I would put the sight on the bull and adjust sights to the group. hope this helps.

 

[Kansas Kid]

I’ll guess 10 inches.

 

[mrd]

I’ll guess 10 inches.

Wow that's alot ! Just replaced the front with a blade site and going to sight it in on Sun. and want to get some math in my head.

 

[Phil Coffins]

You can measure the threads on the adjuster and make the other measurements of the sights to have an accurate way of determining what one turn will do. If it has fourty threads per inch it will move the sight .025” and then knowing the distance between it and the front sight you can calculate the impact change at any distance.

 

[bluemule66]

or just shoot it and adjust as needed.