• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Pillow Ticking and Sizing

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 29, 2015
Messages
427
Reaction score
417
I see a lot on the forum about washing pillow ticking to remove sizing. What is the reason? Would it be necessary to prewash if I use a wet patch lube?
 
It taste bad....plus some say it tightens the weave of the material, too my understanding.
 
I've used patching that I forgot to wash, and performance didn't seem to suffer. The washed ones are a little more flexible though.
 
I see a lot on the forum about washing pillow ticking to remove sizing. What is the reason? Would it be necessary to prewash if I use a wet patch lube?

Fabric sizing is a starch, I don't want starch in my barrel.
 
I've been told it's Cornstarch. If you don't wash it out prior to use...You'll find it more difficult to use liquid lubes. Not impossible...just more difficult. I buy my patch material by the yard and wash it twice in HOT water without fabric softener.
 
I've been told it's Cornstarch. If you don't wash it out prior to use...You'll find it more difficult to use liquid lubes. Not impossible...just more difficult. I buy my patch material by the yard and wash it twice in HOT water without fabric softener.
As Ed McMahon would say on the old Johnny Carson show, "You are correct, sir!"
 
Besides the sizing, some fabrics can also be treated with things like pesticides or anti mold agents to protect the product during storage or shipping.
I'm often a spit patcher, so I don't want any of that in my mouth.
 
It seems to be a consensus from "the dozen or gross or more" that it is important to wash the sizing from the fabric.
It's an old concensus that goes way back. "Always wash your new patching to remove the sizing from the fabric" was quoted to me back in 1976.
 
I like to wash in hot water a couple of times, then dry in the drier on high heat. It can tighten the weave just a tad as the fibers contract. Then I check it with the micrometer. It normally mic's-out at a tad thicker, say perhaps .001 to .003 than it did on the roll in the store. So that .015 material might then be .016 or even .018.

LD
 
Back
Top