• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Possibles bag

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Of course that was back before we found out that no one on the forum could really hit a 3x5 card at 50 yds off hand and they were worried that coning would mess up their 1" offhand groups!

Not no one, just few. We'll see how I do with the coned muzzle on the flintlock I have on order. ::
 
I've had the muzzles of all of my guns coned. Rifles, smoothbores and pistols. I haven't noticed any change in accuracy because of doing so. They all still shoot better than I am capable of shooting. On a good day, they can still shoot one-hole groups at 25 yards off-hand. It is easier to load, so I'm not as tired at the end of a long day of shooting.

Have you noticed difference in the way the shot patterns from the smoothies? Just curious.
 
Hey Stumpy have ya been holdin' out on us, or have I just been too busy with huntin' season and all.

What ya got on order pray tell? :what: :huh:

Chuck
 
This is a piece built by committee. It is loosely a PA longrifle from the post-Rev War era. Call it "Late Longhunter". John Donelson is building me a hand-forged-iron mounted semi-copy of a J. Rupp (the elder) Lehigh based on the profile & approximate dimensions of an original (2" less barrel length).

This is a copy of the same original J. Rupp Lehigh rifle, but by Eric Kettenburg (note cherry stock)
jrupp1.jpg


L.C. Rice made the 44" swamped (medium crown w/ slight cone) barrel in .54 cal, got the Jim Chambers L-5 "Early Germanic" Christian Spring style flint lock from Tip Curtis, premium cherry stock (a little different), fleur-de-lis carving at comb & wrist, some other carving at tang, as budget holds up for a rudementary "C" scroll, and the type-identifying Indian/Liberty Head incised carving ahead of trigger guard, engraved patchbox and toe-plate, silver front sight & wrist inlay with my monogram.

Fred Miller is (at the moment, I hope) inlaying the barrel into the stock for me.

It's bordering on a fantasy piece, as there are no signed J.Rupp iron-mounted longrifles. But, there are only two known signed ones anyway, and they are both primo works (meaning he probably built several before those two). I just wanted iron furniture and I like the looks of cherry (especially with a bit of carving - makes it show up better).

Ted Reese (Calico Jack's Trading Post) is at the moment making me a copy of a hunting pouch (plate #11 on page 25) from Madison Grant's book of approximately the right period to complement the rifle. (Had to get this back to "Possible Bags").
 
Thanks for the previous posts on coning. All I ever wanted to know on the subject and probably a lot more. :master:
 
Hey Keith,
I wish I knew more about shot from my smoothbore for a better answer than "I don't shoot enough or shoot well enough when I do shoot shot to tell the difference."
My friends that do alot of blackpowder shotgunning &/or smoothbore shot shooting, have told me that there isn't enough evidence to convict me a ever being a shotgun shooter. I don't concentrate enough on shooting shot from the smoothbore. I have & haven't broken birds or hit the target at the shoots / woodswalks where that kind of stuff in done. I'm glad I don't have to feed myself with my huntin' & fishin skills because I would starve. I miss way more than I hit, and I don't blame it on the gun.
 
Back
Top