- Joined
- Mar 23, 2015
- Messages
- 5,014
- Reaction score
- 3,585
Blow them out with air before it dries and oil sparingly with oil before reinstalling.
Problems With "New" Pedersoli Shotgun
- Thread starter Walkabout
- Start date
Help Support Muzzleloading Forum:
calvinolson
32 Cal
Carburetor cleaner has been the strongest spray solvent/cleaner , I have found for oils and grease.
Crow#21957
50 Cal.
If you like the gun overall except this problem take it for repaire or get on Google and learn how.
There's always small claims.
There's always small claims.
Crow#21957
50 Cal.
It's really not hard to dissasembke the locks.You need a mainspring vice. Study on tge internet on how this guns locks cone apart. Take them apart and soak parts in lacquer thinner. Don't mix up Left And Right lock parts. You might have a main spring hung up on the plate and needs cleaned and maybe clearance added. I love working on this stuff. Call pedersoli even though it's older if your very nice and have a good tone while talking to them you might be surprised
at the help you can get. Don't get disgusted just chip away at the problem and in the end you will be more knowledgeable and have a sweet shooter.
at the help you can get. Don't get disgusted just chip away at the problem and in the end you will be more knowledgeable and have a sweet shooter.
I already have one lock partly disassembled, except for the spring. They're both soaking in solvent until I get home from work. Thanks
Crow#21957
50 Cal.
If you pull the spring get a spring clamp. I tried vise grips years ago and broke a $30 spring.
- Joined
- Mar 23, 2015
- Messages
- 5,014
- Reaction score
- 3,585
Sounds like a bargain price for a set of locks if that’s for the pair. I would just lube the locks since you’ve cleaned them and put them back in and see what you have. Check to see if they function okay out of the stock before assembly. If they do but not in the stock then you have some other problems. Likely binding on wood somewhere.
Crow#21957
50 Cal.
If I were a real ML gunsmith I would let you shop them to me and repaire them just for whatever parts. But may not be in the locks.
Would really need whole gun. If I was close to you we would put our collective intelligence together and gettr done.
Would really need whole gun. If I was close to you we would put our collective intelligence together and gettr done.
DocHolliday
32 Cal
- Joined
- Feb 21, 2021
- Messages
- 12
- Reaction score
- 34
Also, in my experience, Ballistol isn’t the best lubricant. It’s a wonder fluid and lots on this board love it. I use it and for its purpose it works. In your application, however, there’s better. Good luck.
Crow#21957
50 Cal.
Those locks would mist likely solve the problem. Ask him if you screw them to the gun and it still done work whats the refund policy
How did the Vega get in that mix? …Marriage?Ha, ha, ha -- Ford or Chevy -- my first car was a Studebaker 1957 Golden Hawk - great car. My second was a 1961 MGA also a great car. I then went for HP with a 1967 Chevelle SS 396 - FAST and a thrill a minute E.T. 12.56 in the quarter @ 108 MPH . Then 1971 Chevy Blazer 4X4 then some other cars, Firebird, Vega, Monte Carlo, then went to Ford pick-up trucks - great pick-up trucks. Now with "old man" Ford cars - had fun with all of them and found either one to be good cars IF you did not get a LEMON.
YUP - and a kid -- it was a green wagon YUCK - worst car that I ever purchased!!!!
Do the locks have fly's that are damaged or missing? I have one of the older doubles from Pedersoli and have no problems. The reason I'm leaning that way is you said they catch when out of the stock. It could be to much greasy crud keeping the fly from doing the job. Use a good cleaning solvent and light thin oil like Ballistol in the spray can and try it again. Good luck!
There is no fly.
If they play up in the stock the problem is a wooden one or a sear bar/trigger blade relationship problem.
If they play up in the stock the problem is a wooden one or a sear bar/trigger blade relationship problem.
Vintage Gunsmith
32 Cal
I just looked at the picture of the locks. Do you see that little bright scrape on the inside of the lock plate just to the right of the stamped number 6? That should tell you that the upper cross piece of the stirrup (connects the spring to the tumbler) is dragging on the plate and probably slowing down the fall of the hammer. Remove the spring using your new handy spring vise, disconnect the stirrup and carefully shorten the end of the cross piece enough to stop the rubbing. Use a sharpening stone by hand, not the 6" power grinder to do this.
Vintage gunsmith if you look real close looks like the other lock has a similar scrape.
- Joined
- Jun 17, 2019
- Messages
- 8,399
- Reaction score
- 9,816
The term 'whodathunkit' should be placed in that dictionary thing they have every year, where new words are ensconced as 'official'. It exactly describes what it reads as. (Oxford English Dictionary, I think!)
Good goin!
That scrapping on the lock plates in the photograph was remedied years ago and likely not the OP’s problem. The photograph IS NOT of the OP’s locks….. I posted the photograph of locks from a gun I own to show the simplicity of the locks.
