ARKLITE881South
Pilgrim
- Joined
- Feb 7, 2013
- Messages
- 3
- Reaction score
- 0
Are there a rear sight for the TC Hawken rifle that will go on the rifle without cutting any wood, or drilling any extra holes in the barrel? thanks
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Rear sight for Thompson Center Hawken rifle
- Thread starter ARKLITE881South
- Start date
Help Support Muzzleloading Forum:
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,348
the Hawken Shop, Gunworks Muzzleloading Emporium & likely numerous others sell a fixed buckhorn sight that mounts on the barrel usin' T/C factory sight mountin' holes.
if you have the third hole in yer tang the Lyman 57sml peep sight will mount on the 45 & 50 caliber Hawken with no wood removal required. on the 54 Hawken & Renegade models a spacer is needed or a bit of wood removed beside the tang on the left side.
if you have the third hole in yer tang the Lyman 57sml peep sight will mount on the 45 & 50 caliber Hawken with no wood removal required. on the 54 Hawken & Renegade models a spacer is needed or a bit of wood removed beside the tang on the left side.
I have one, and sent you a PM about it.
Old No7
Old No7
nwtradegun
50 Cal.
- Joined
- Jan 19, 2011
- Messages
- 1,496
- Reaction score
- 17
i just got a t/c no.907 fixed rear site. if you beat the bushes and post you may find one as I did. it used the rear site mounting holes.
Similar threads
- Locked
